Manual Toolcraft LDM 30 (page 31 of 85) (English, German, Dutch, French)

574412

Zoom out

Zoom in

1/85

9. Operation

a) Switching On/Off

• To activate the laser distance meter, briey push the measuring button „ “ (B).

Then all display segments appear briey; afterwards, a sound signal is audible and the laser is

activated. The laser distance meter is now ready for operation and a measuring process can

be started (see chapter 9. b).

If the laser is to be deactivated, briey push the power button „ “ (D). The laser is also

automatically deactivated after 30 seconds to save power.

• To switch the device off. keep the power button „ “ (D) pushed for 3 seconds.

The laser distance meter switches off automatically after 3 minutes if no button is

pushed.

b) Individual Distance Measurement

• Switch on the laser distance meter with the measuring button „ “ (B) rst, see chapter 9.

a).

• If the laser lights up, place the lower edge of the laser

distance meter at one surface and point the laser beam

accordingly so that the distance can be measured.

• Now briey push the measuring button „ “ (B) to

measure the distance and display it in the bottom line

(4). The laser goes out.

• If a measurement is to be repeated, briey push the

measuring button „ “ (B). The laser is now activated

again.

After pushing the measuring button „ “ (B) again briey, the distance is measured and

displayed.

The preceding measured value appears in the upper line (3), the current one in the

lower line (4). You can compare two distances or two measurements, for example.

• After briey pushing the Power button „ “ (D), the respective last measured value can be

deleted from the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolcraft LDM 30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolcraft LDM 30 Manual

Product: