Manual Toolcraft LDM 30 P (page 36 of 93) (English, German, Dutch, French)

574411

Zoom out

Zoom in

1/93

Measurement reference

• As per the factory default setting, measurements are taken

beginning from the back of the device.

• Push the button (F) to change the measurement reference. The

following measurement references are available:

• Zero point: Back of the device

• The device length is included in the measurement.

• Zero point: End piece (I) on the back

• Fold out the end piece on the back.

• The device length and end piece length are included

in the measurement.

• Zero point: Front of the device

10. Distance measurement

1. If the target laser (B) is not activated, push the button ON (C) to

activate the laser.

2. Point the laser at a right angle at the target and hold the device as

still as possible.

3. Push the button ON. Shortly, a beep sounds and the reading is

shown on the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolcraft LDM 30 P in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolcraft LDM 30 P Manual

Product: