693117
3
Zoom out
Zoom in
Previous page
1/4
Next page
2. USAGE
Before each use you must ensure that your water tank is above the minimum fill mark.
Water to fill the unit must come from the cold tap.
Check the water level and top up if
necessary with COLD WATER. When
filling the tank, you must always fill the
hopper and as the water passes through
the filter you can regularly top it up.
1
Turn the dial to select the feed
size you require (4fl oz –11fl oz).
2
Position your sterilised bottle
under the dispenser. Adjust bottle
stand if necessary. (Bottle neck
should sit close to the outlet).
3
Press the start/stop button. A red
light will flash and a volume of
HOT WATER is dispensed into
your bottle.
4 5
The light will change to solid red
and there will be a double beep
to indicate the end of the first
stage. You will need to make up
your feed within 2 minutes.
Carefully remove the bottle from
the stand and measure the
correct number of formula
scoops into the bottle.
6 7
Screw the sterilised milk storage
lid onto the bottle and ensure
that the lid is tight. Be careful
when handling hot liquid.
Shake well until the formula
powder has dissolved.
8 9
Remove the milk storage lid and
replace your bottle onto the
bottle stand.
10 11
Always check that the amount
dispensed is consistent with the
size of feed you have selected on
the dial. Add the sterilised teat,
screw ring and hood and shake.
12 13
For your child’s safety always
check food temperature before
feeding by testing on a sensitive
part of your skin.
Your bottle is now ready to serve.
Make sure you discard any
unwanted feed as per the formula
manufacturers recommendation.
Press the start/stop button again.
The red light will go out and the
green light will flash. If this button
is not pressed within 2 minutes of
the hot water being dispensed a
long beep will sound. If the alarm
sounds you should discard the feed
and repeat the process from step 1.
Wait whilst the remainder of
water is dispensed. Once
completed, there will be a
double beep and the green
light will change to solid.
If at any point you need to stop the perfect prep™ machine you can
do so by pressing the start/stop button. The pump may continue to
run for a few seconds and the green light will illuminate to show that
the process has ended. It will not be possible to restart the machine
for 20 seconds. Should you have to stop the perfect prep™ machine
please discard of any feed.
HOW TO STOP THE PERFECT PREP™ MACHINE
For a cool tank keep the unit out of direct sunlight and away from
sources of heat. Fill with
COLD WATER from the fridge. Regularly top
up with
COLD/COOLED WATER.
HINTS AND TIPS
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tommee Tippee Perfect Prep - 423708 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tommee Tippee Perfect Prep - 423708 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info