693105
5
Zoom out
Zoom in
Previous page
1/10
Next page
Check immediately the location of corded monitors to make sure cords are out of arms reach of
your baby and other young children.
Place cords more than a metre away from any part of the cot. The monitor must not be used in any
other sleep environment.
Check the location of the monitor periodically, as what is within arms reach to a baby will change as
the baby grows.
Make sure the sensor cords are taut and not dangling to reduce the strangulation hazard.
Do not place furniture or other obstructions on the adaptor cords and be sure to position them so
that nobody can trip over them
Keep adaptor cords away from hot surfaces such as radiators and central heating pipes.
Be careful not to position the adaptor where a child might try to stop on it.
Never use Tommee Tippee monitor adaptors with any other equipment. Nor should you use any
other adaptors with your Tommee Tippee monitor.
Please note that the adaptors become warm in use –
this is quite normal and not a hazard.
The adaptors convert your AC power to a safe low DC voltage.
Use the power adaptor provided.
The product is only suitable for use for cots and cotbeds that comply with EN716.
Adaptor:
Manufacturer: TEN PAO INTERNATIONAL LTD.
Model no.: EU: S006MV0600080 UK: S006MB0600080
setting up the parent unit
Connect the mains adaptor into a nearby wall socket in your baby’s nursery and switch on the power
at the mains.
Press POWER on the parent unit until the POWER INDICATOR is on. The parent unit is now powered
on and the parent unit will search for and link itself to the baby unit.
Ensure that the sensor pad on-o switch is turned OFF.
In monitoring mode, you can press <LCD ON/OFF> on the parent unit. Turning o the LCD will not
power o the parent unit, you can still monitor the baby with it
setting up your baby unit
Connect the mains adaptor into a nearby wall socket in your baby’s nursery and switch on the power at
the mains.
Press POWER on the baby unit until the POWER INDICATOR is on. The baby unit is now powered on and
will link with the parent unit.
Ensure that the sensor pad on-o switch is turned OFF.
Direct the camera towards the babys cot. For adjusting the zoom feature, refer to section
Adjusting the Zoom.
testing the parent unit
First ensure that the baby unit has been set up and is working correctly following the previous
instructions.
To test the parent unit you must ensure that it is at least 5 metres away from the baby unit.
Turn the sensor pad OFF.
Place a sound source in the nursery at least 1 to 1.5 metres away from the baby unit, close the nursery
door and go to another room with the parent unit only.
Turn on the power and adjust the volume up or down to a comfortable level.
You will hear sounds from your nursery.
Walk around your house and garden with the parent unit, ensuring that you can hear the sounds from
the baby unit at all times. The monitor will work up to a distance range of 300m approximately.
Depending on the surrounding conditions as well as spatial and structural factors. The range indoors is
normally less than outdoors.
If you lose the signal from the baby unit a beep tone will be emitted from the parent unit and the
antenna icon will ash. Even if the speaker volume is set OFF, the alert tone will still emit at volume
level 1 when no link alert is triggered. Alert tone will only be emitted once initially. The screen will
continue to show NO LINK until restored.
1
2
3
4
1
2
3
4
NOTE:
Any triggering events such as baby cries, temperature of baby’s room exceeds the alert range,
parent unit loses link with baby unit, etc. will turn on the LCD automatically.
WARNING about using the baby unit!
The baby unit should be 1 to 1.5 metres away from the baby’s cot on a at surface or use the
tripod mount.
Never place the baby unit in or attach to the baby’s cot.
9
8
WARNING about the danger of cords:
STRANGULATION HAZARD! - Keep cords out of the reach of children.
Do not use with an extension cord.
WARNING! STRANGULATION HAZARD! Children have STRANGLED in cords.
When using without protective covering. Keep this cord out of the reach of children
(more than 0.9 m (3ft) away).
!
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tommee Tippee 1094S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tommee Tippee 1094S in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info