748229

Tomado TWC3701W Manual

17
Zoom out
Zoom in
Previous page
1/88
Next page
EN - 17
Instrucon: When the baery is almost empty, the indicator led starts to ash slowly. Aer some me, the appliance
switches o completely when the baery is empty. Charge the baery.
9 Press the on/o buon ( ) to switch o the glass cleaner. Always switch o the appliance when spraying a surface
to extend the usage me of the baery.
Cleaning windows, mirrors or les is also possible without using the spray bole. Clean your windows in the usual way
and use the glass cleaner to absorb the cleaning agent and clean your windows without leaving any streaks.
EMPTYING THE COLLECTION RESERVOIR
10 Empty the collecon reservoir once the amount of dirty water has reached the maximum indicaon. Switch o
the appliance. Open the lip 1 and allow the collecon reservoir to empty.
11 Once the collecon reservoir is empty, press the lip closed again.
Press the on/o buon ( ) to switch o the glass cleaner.
12 The glass cleaner contains electrical components. Do not clean the appliance itself under the tap. Press push buon 1 to
release the squeegee aachment 2.
The squeegee aachment can be cleaned under the tap.
• Remove the microbre cloth from the holder and rinse it under the tap. The microbre cloth can be washed in the washing
machine at 30 ᵒC. Do not use a fabric soener.
• The basis of the glass cleaner may be wiped with a damp cloth.
13 Empty and clean the collecon reservoir aer using it a couple of mes. Press down the lip 1 of the collecon reservoir
and remove the reservoir 2 from the basis.
14 Open the collecon reservoir by pulling the upper and lower halves away from each other. Carefully remove the internal
component from the lower half of the reservoir. Now clean the inside of the reservoir under the tap or by means of a damp
cloth. (Cauon: The components of the glass cleaner should NOT be washed in the dishwasher!)
15 Place the internal component back in the lower half of the reservoir. Click both halves of the reservoir together and place
the reservoir 2 back in the basis. Check that the lip 1 clicks and is fastened.
• Allow all components to dry properly before reassembling the appliance.
• Charge the baery so that the appliance is ready for its next use. Aer charging, remove the charger from the socket.
• Store the appliance upright in a dry room.
INDICATOR LED
LICHTS CONTINUOUSLY (motor is on) The appliance is working normally
FLASHES SLOWLY (motor is on) Baery is running empty (less than 5% capacity remaining)
FLASHES QUICKLY (motor is o) Baery empty
FLASHES SLOWLY (during charging) Baery is being charged
LIGHTS UP CONTINUOUSLY (during charging) Baery is fully charged
FLASHES QUICKLY Safeguard against overloading acvated (motor uses too
much power, e.g. due to a blocked venlaon opening
or when the collecon reservoir is placed incorrectly).
AFTER USE
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomado TWC3701W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomado TWC3701W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info