488870
15
Zoom out
Zoom in
Previous page
1/19
Next page
y When the indicator light goes off, the required temperature is reached. The iron is
ready for use.
y To turn off the iron, turn the temperature regulator counter-clockwise to position
OFF ”, set the iron upright, and pull out the power plug.
STEAM IRON
y Fill the water tank, as described under before initial usage.
y Steam ironing can be used in the temperature ranges ., .., … MAX. For a reliable
functioning of the steam function, the water tank must be filled to at least 1/4.
y Spraying function: Press the spray button to moisten a spot to be ironed. Water will
came out of the spray nozzle.
y Steam Function: Turn the steam control knob to the required position, steam starts
coming out from the holes in the soleplate.
y Burst of steam: Turn the temperature regulator to the position “MAX”. The indicator
light will goes off when the required temperature is reached then press the burst of
steam button . This function provides an extra amount of steam to remove stubborn
wrinkles.
y Push the extra steam button to remove stubbed creases. Wait a couple of seconds
before pressing this button again.
y The iron surface must always be kept in an upright position.
y To turn off, turn the temperature regulator counter-clockwise to “ OFF ” and pull out
the power plug.
y Turn the appliance upside down and carefully pour the remaining water out of the
water tank. Carefully shake the appliance.
y Press the spray button to allow possible remaining water to come out more easily.
Notice: With conventional steam ironing, water may leak from the soleplate if a too
low temperature has been selected. If this happens, turn the temperature regulator to
the advised position. Steam will recommence as soon as the appropriate temperature
has been reached.
SELF-CLEAN FUNCTION
You can use the self-clean function to remove scale and impurities.
Use the self-clean function once every two weeks if the water in your area is very hard.
The self-clean function should be used more frequently.
z Make sure the appliance is unplugged.
z Set the steam control knob to position “ 0 “.
z Fill the water reservoir via its opening.
z Select the maximum ironing temperature.
z Put the plug in the wall socket.
z Unplug the iron when the temperature indicator light goes off.
z Hold the iron over the sink, press and hold the self-clean button and gently shake the
iron. Steam and boiling water will come out of the soleplate. Impurities and flakes (if
any) will be flushed out.
z Release the self-clean button as soon as all water in the tank has been used up.
z Repeat the self-clean process if the iron still contains a lot of impurities.
CLEANING
y Before cleaning the Iron ensure it is disconnected from the power supply and has
completely cooled down.
y Deposits on the soleplate may be removed with a rough cloth soaked in a vinegar
water solution.
y The casting may be wiped with a damp cloth and then polished with a dry cloth.
y Do not use abrasives on the soleplate.
y Keep the soleplate smooth. Avoid hard contact with metal objects.
TECHNICAL DATA
Type nr: TM-1935
Power: 2200W
Supply voltage: 220-240V~50Hz
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomado TM-1935 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomado TM-1935 in the language / languages: Dutch as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info