748195
20
Zoom out
Zoom in
Previous page
1/96
Next page
EN - 20
CLEANING AND MAINTENANCE
RESOLVING FAILURES YOURSELF
The cooler secon defrosts automacally. Regularly clean the larder to guarantee a proper funcon.
Before cleaning the appliance, switch it o by seng the thermostat to OFF and removing the plug from the wall socket.
Remove all food from the larder. Clean the inside of the larder. Use warm soapy water with a neutral cleaning agent
to prevent nasty smells. Wipe the inside of the larder aer cleaning with clean water and properly wipe everything dry.
Leave the appliance to dry for 1 to 2 hours. The shelves, drawers and door compartments can be removed from the larder
easily and washed by hand. These components may not be cleaned in the dishwasher.
For areas in the larder that are dicult to clean, such as small openings or corners, it is recommended wiping them clean
regularly with a so cloth or brush. If necessary, a tool can be used, such as thin scks (cocktail scks, for example), to make
sure no contaminaon can occur in these areas.
Clean the outside of the larder and the door rubbers with a so damp cloth.
Clean the rear of the larder at least one per year with a vacuum cleaner, so that the condenser and venlaon holes remain
clean and the larder is able to funcon as opmal as possible.
Do not use hard brushes, steel wool, abrasives (such as toothpaste), organic solvents (such as alcohol, acetone, oil, etc.),
boiling water, acid or alkaline product to clean the larder, as this could damage the surface and interior of the larder.
Boiling water and benzene could deform or damage plasc components.
REPLACING THE LED LAMP
This appliance has been provided with a LED lamp. This lamp lasts for a longer period of me. When the LED lamp
in the appliance is broken, you are not able to replace it yourself. Contact the Inventum service department.
Breakdown Cause Soluon
Appliance does not do anything;
led does not light up
Plug not in socket Insert the plug in the socket.
Temperature in the larder is too high
or too low
Incorrect thermostat seng Set the thermostat to the correct seng
Venlaon openings are blocked Clean the venlaon openings
Appliance makes noise Is the appliance properly installed? Check the installaon
Does the rear of the larder make
contact with something?
Check this and move the larder forward
Note: bubbling and expansion noises in the cooling circuit are normal.
RECYCLING
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the rules that apply in your country for the separated collecon of electric and electronic products.
Correct disposal of the product prevents negave consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomado TLT4701W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomado TLT4701W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info