748273
14
Zoom out
Zoom in
Previous page
1/76
Next page
EN - 14
ASSEMBLY
Before using the fan for the rst me, please proceed as follows: carefully unpack the appliance and all components and
remove all packaging material and any promoonal sckers.
Keep the packaging (plasc bags and cardboard) out of reach of children.
Aer unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Assemble the fan in accordance with the instrucons.
In order to make the assembly process more easy, we recommend removing components [ a ] and [ b ] before you start.
1. Start by placing the cross foot at the pedestal. Place the parts of the cross foot cross-wise on top of one another and align
the connecon base with the screw openings on the cross foot. Mount the pedestal to the cross foot using the screws [ b ].
2. Place the motor secon on the pedestal and fasten it with screw [ a ].
3. Place the rear protecve guard on the fan.
4. Fasten it by ghtening the lock ring.
5. Insert the fan blade onto the fan. Test the fan blade by rotang it by hand. When rotang, the blade should not create
any fricon with the lock ring. If it does, remove the fan and repeat all steps from the beginning.
6. Mount the fan blade with the fastening cap. Tighten the fastening cap by turning it to the le - counter-clockwise.
7. Place the front protecve guard on the fan and use the clamps to aach it to the rear protecve guard.
- Align the front protecve guard with the rear protecve guard using the posioning clamp [ c ] on the boom side in
order to aach both parts to each other properly. Use the bolt and nut at the top of the guards to fasten the guards
to each other.
- Press the clamps [ d ] downwards in order to fasten the front and rear protecve guards to each other.
Place the fan on a at, stable surface. Clean the exterior of the fan using a slightly damp cloth and then wipe it with a dry cloth.
The fan is ready for use.
OPERATING THE PEDESTAL FAN
The range of the remote control is approx. 5 metres at an angle of 30° in front of the fan.
Insert the two supplied AAA 1.5 Volt baeries in the remote control, as indicated in the drawing.
Do take the plus and minus symbols on the inside of the remote control into account.
The remote control has the same funcon keys as the fan's control panel.
Place the fan on a at, stable surface. Insert the plug in a wall socket.
Switching on/o
Press the ON/OFF key to switch on the fan. By pressing the key once more, you switch o the appliance.
Adjusng the speed
With every press on the SPEED key you change the speed of the fan:
low
= low
med = medium
high
= high
baeries
speed
mer
on/ o
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomado TFS4005B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomado TFS4005B in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info