748274
15
Zoom out
Zoom in
Previous page
1/76
Next page
EN-15
6. Loosen the fastening cap (or take it from the bag) and loosen the lock ring. Aach the rear part of the protecve part
on the motor sha and fasten it with the lock ring - g. 7.
7. Place the fan blade on the motor sha and make sure that the slot of the fan blade properly ts over the pen of the motor
sha. Fasten the fan blade with the fastening cap - g. 8.
Test the fan blade by rotang it by hand. When rotang, the blade should not create any fricon with the lock ring. If it does,
remove the fan and repeat all steps from the start.
8. Place the front protecve guard on the fan and use the clamps to aach it to the rear protecve guard - g. 9.
- Align the front protecve guard with the rear protecve guard using the posioning clamp on the boom side
in order to aach both parts to each other properly. Use the bolt and nut at the top of the guards to aach
the guards to each other.
- Press the clamps downwards in order to aach the front and rear protecve guards to each other.
9. Place the fan on a at, stable surface. Clean the exterior of the fan using a slightly damp cloth and then wipe it with
a dry cloth.
The fan is ready for use.
OPERATING THE PEDESTAL FAN
Place the pedestal fan on a at, stable surface. Insert the plug in a socket.
Switchingon/o
Press one of the posion buons 1 to 3 to switch on the fan. By pressing posion buon 0, you switch o the appliance.
Posion 0 = o
Posion 1 = lowest posion
Posion 2 = middle posion
Posion 3 = highest posion
Oscillaon
This fan is able to oscillate (swerve to the le and right) for a beer air displacement. Press in or pull out the oscillaon knob.
If you want to change the wind to an upward or downward direcon, you can simply lt the fan head upwards or downwards.
Adjusngtheheightofthepedestal
In order to adjust the height, loosen the pedestal adjustment nut and move the fan upwards or downwards. Properly hold
on to the fan when loosening the pedestal adjustment nut, so it cannot drop down unexpectedly. Re-ghten the pedestal
adjustment nut when the fan is at the required height.
Fig.7 Fig.8 Fig.9
Screw
Fastening cap
Lock ring
Fixed
Loose
Fastening cap
Fan blade
Slot
Pen
Fixed
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomado TFS4003B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomado TFS4003B in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 16,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info