748227
15
Zoom out
Zoom in
Previous page
1/68
Next page
EN - 15
Your fryer has been provided with a double safeguard, i.e. a reset buon and a safety switch.
The fryer has been provided with an an-overheang safeguard that ensures that the fryer switches o automacally when
it gets overheated. Remove the plug from the socket and allow the fryer to cool down fully. You can switch on the fryer again
by pressing the reset buon located on the rear of the cord storage compartment. See the image at the product descripon.
Take a round blunt object and use it to press the reset buon in the round opening at the rear of the element.
On the front of the element of the fryer there is a safety switch that ensures that the heang element is immediately switched
o when the element is removed from the fryer while the fryer is sll on. Moreover, this safeguard ensures that the element
cannot be switched on if the heang element is not placed properly in the guides.
If your fryer does not work, we recommend checking the above-menoned safeguards.
FILTERING OR REPLACING LIQUID FRYING FAT
Before you start ltering or replacing frying fat, you must allow the fryer to cool down fully and remove the plug from
the socket. Regular ltering of the frying fat considerably increases the life span of the fat. Replacing the frying fat
is recommended aer deep-frying 8 to 12 mes.
The frying fat should be ltered while cold. Pour the frying fat in a clean dish, clean the reservoir with hot water and
a lile washing-up liquid or in the dishwasher. Properly dry the reservoir. When pouring the frying fat back in the reservoir,
let the frying fat run through a ne sieve. When replacing the frying fat, observe the same acons. Check each me that
the level of the frying fat is between minimum and maximum. Used liquid frying fat can be poured back in the boles.
Never ush away frying fat in the sink.
CLEANING THE FRYER
Before cleaning the fryer, you must allow the fryer to cool down fully and remove the plug from the socket. Remove the cover,
frying basket, element and reservoir from the fryer. Clean the cover, frying basket and reservoir in the dishwasher or with
hot water and a lile washing-up liquid. Make sure the parts are properly dried aer cleaning. You can clean the exterior
of the fryer with a damp cloth to which a lile bit of washing-up liquid has been added.
Do not use aggressive or abrasive agents for cleaning the appliance. Never submerge the element, cord or plug in water
or other liquids.
SAFETY
CLEANING AND MAINTENANCE
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the applicable rules in your country for the separated collecon of electric and electronic products.
By disposing of the product correctly, you prevent negave consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
RECYCLING
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tomado TDF3001S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tomado TDF3001S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info