46 Ferm
ROUTER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2.
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1 router
1 cutter
1 parallel guide
16 mm collet (1/4”)
18 mm collet
1 open-ended spanners
1 hexagonal key
1 instruction manual
1 safety instructions
1 guarantee card
Check the machine, loose parts and accessories for
transport damage.
PRODUCTINFORMATION
Fig. A.
The router has been designed for professional routing of
wood, wood products and plastics.
1 on/off switch
2 machine clamp screw
3 clamping lever for depth adjustment
4 handle
5. collet bracket
6 collet nut
7 router base
8 opening for parallel guide
9 locking bolt for parallel guide
10 revolver-depth stop
11 scale cutting depth
12 locking bolt depth stop
13 adjusting wheel electronic speed control
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Electrical safety
Always check that the power supply corresponds to the
voltage on the rating plate.
Your machine is double insulated in accor-
dance with EN 50144; therefore no earthwire
is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm
2
. When using a cable reel always unwind
the reel completely.
SPECIAL SAFETY INSTRUCTIONS
When using electric machines always observe
the safety regulations applicable in your country
to reduce the risk of fire, electric shock and per-
sonal injury. Read the following safety instructi-
ons and also the enclosed safety instructions.
Keep these instructions in a safe place!
• Check workpieces for any protruding nails etc. and
remove these.
• Keep your hands away from the surface to be cut.
Voltage | 230 V
Frequency | 50 Hz
Power input | 550 W
No load speed | min-
1
| 11500–32000
Max. cutter diameter | 20 mm
Plunge | 32 mm
Collet | 6 + 8 mm
Weight | 3.25 kg
L
pa
(sound pressure) | 81,3 dB(A)
L
wa
(sound power) | 94,3 dB(A)
Vibration value | < 4.0 m/s
2
Fuses 230 V machines | 10 A
Ferm 3
SPARE PARTS LIST
REF.NR. DESCRIPTION TOLEDO NR.
001 SWITCH 302008
002 HANDLE 302003
003 LOCKING BOLT 302002
004 COLLET NUT 312009
005 CUTTING DEPTH STOP 302009
006 CLAMPING LEVER 302010
007 ELECTRONIC SPEED CONTROL 302011
008 ROTOR 302012
009 STATOR 302013
010 CARBON BRUSH (SET) 302014
011 DUSTEXTRACTING ADAPTOR 302015
015 GUIDE ROD 302005
016 GUIDE FRAME 302006
- OPEN ENDED SPANNER 302016
- OPEN ENDED SPANNER (COLLET NUT) 312011
- SPRING COLLET 6 mm 312012
