631481
16
Zoom out
Zoom in
Previous page
1/41
Next page
CONNECTION & SETTING UP
Installing batteries (backup for the clock in case of a power outage)
- Open the battery compartment on the back of the appliance (17).
- Insert 2 LR3 1.5V batteries, respecting the indicated polarity.
- Close the battery compartment.
INFORMATION ABOUT THE BATTERIES (not supplied)
- The clock must be equipped with the appropriate battery in order to function properly.
- Only the recommended batteries should be used.
- Polarity must be respected when inserting the batteries.
- The batteries should be inserted in such a way as to avoid any short circuit.
- Do not mix used and new batteries.
- Do not mix alkaline, standard (carbon-zinc) and rechargeable (nickel-cadmium) batteries.
- Do not recharge or try to open the batteries. Do not throw the batteries in the fire.
- Replace all batteries at the same time with identical batteries.
- Remove the batteries from the appliance if not used for a long time.
- If the liquid contained in the battery comes in contact with eyes or skin, wash the area immediately and
carefully with clear water and consult a doctor.
- Do not expose batteries to excessive heat such as solar radius, fire or similar.
- WARNING: Danger of explosion if the batteries are not placed properly.
In order to respect the environment, do not throw spent batteries out with household
waste. Dispose of them at your nearest recycling centre or at a used battery collection
point.
Connecting the product
- Install the stand on the top of the sound station.
- Connect the speakers to the sound station by plugging the sockets inside jacks (12) et (13).
- Connect the plug of the mains voltage adaptor into the socket (14). Plug the other end of the mains
adaptor into a mains socket.
- Only use the adaptor supplied. If another adapter is used, first make sure that it has identical
specifications.
PHONES
The system includes a stereo PHONES jack on the front panel of the main unit. You may connect a
set of stereo headphones, not included, to this jack for private listening without others.
The main unit speakers are automatically shut off when headphones are connected to the PHONES
jack. If the plug is not fully inserted the sound may be intermittent or you may hear sound one side
of the headphones.
IMPORTANT: To prevent hearing damage always set the volume control to a low level before you
connect the headphones. Then connect the headphones, put them on, and very gradually increase
the volume to a comfortable listening level.
15
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tokai WO-243 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tokai WO-243 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info