631458
25
Zoom out
Zoom in
Previous page
1/37
Next page
25
5. OPERATION OF THE CONTROLS
b) When you long press 2 seconds, it shows the time then it is activated as cyclical mode of following
functions for users selection.
-> INVOL
-> DSP (Rotate the VOL knob to adjust
the HOUR or MINUTE)
-> BEEP (ALL/OFF/2ND)
-> TAVOL->EON ON/OFF
-> REG ON/OFF
-> AF (ON/OFF)
-> EON (ON/OFF)
-> TA (ON/OFF)
-> EQ ON/OFF
-> LOUD (ON/OFF)
-> LOC ON/OFF (only for FM mode)
-> MONO/STEREO (only for FM mode)
-> AREA (EUR/USA)
After selecting the desired mode, rotate the VOL knob to select one setup item of the desired mode.
1) TA [TRAFFIC ANNOUNCEMENT]
When TA mode is on (TA is displayed on LCD), it will begin to seek TA station and TA SEEK will be displayed
on LCD for a while.
When traffic announcement is transmitted:
(1) If the unit is in USB or disc mode, it will switch to radio mode temporarily. Temporarily switch over to an
EON linked station when EON detects traffic announcement on that other program, and TP will be displayed
on LCD.
(2) If volume level is below 20, volume level is raised to 20, and returns to its previous mode and volume
level when the traffic announcement is over.
(3) If volume is adjusted during traffic announcement, only the traffic announcement volume is valid.
* TA interruption function:
The current traffic announcement is cancelled by pressing this key. But the TA mode will not be off.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic
program identification code has been received.
2) AF [ALTERNATIVE FREQUENCIES]
When AF switching mode is selected; AF indicator is displayed on LCD display.
AF indicator is off: AF switching mode off.
AF indicator is on: AF switching mode on, and has RDS information.
AF indicator is flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of ALTERNATIVE
FREQUENCIES all the time. The interval of checking time of each ALTERNATIVE FREQUENCY depends
on the signal strength of current station, from a few minute for strong station to a few seconds for weak
station. Every time that new AF is stronger than current station, it switches over to that frequency for very
short time, and NEW FREQUENCY is displayed for 1-2 seconds. Because the mute time of AF switching or
checking time is very short, it is almost inaudible in case of normal program.
In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save RDS
program.
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tokai LAR-354B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tokai LAR-354B in the language / languages: English, French as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info