692132

Toa MM-700F Manual

23
Zoom out
Zoom in
Previous page
1/36
Next page
23
10.3 Priority Mix
Step 1. Set the PRIORITY MIX 1+2 switch on
ON (Right) OFF (Left)
PRIORITY 1 and PRIORITY 2 will be mixed and output to CH1,
CH2, CH3, CH4 when mute activated. The PRIORITY
FUNCTIONAL DIP SWITCH (20), MUTE SENSE control (18),
HOLD TIME control (19) will be followed by PRIORITY 1’s
setting
The PRIORITY 1 has the higher priority level than PRIORITY 2.
When There is mute function activated. Unit will output
PRIORITY 1’s input first.
Step 2. Assign the PAGE CH:
This operation is same as 10.1 Step 1.
Note: When PRIORITY MIX 1+2 is on, the paging channel only need to set from Priority 1’s
PRIORITY FUNCTIONAL DIP SWITCH, set from Priority 2’s PRIORITY FUNCTIONAL DIP
SWITCH won’t affect the setting.
Step 3. Set PRIORITY 1+2 auto mute trigger threshold:
Adjust the MUTE SENSE CONTROL to set the auto mute trigger threshold, rotate clockwise
will increase the sensitivity, rotate counter-clockwise will decrease the sensitivity.
Note: When PRIORITY MIX 1+2 is on, the auto mute trigger threshold is control only from on
Priority 1’s MUTE SENSE CONTROL, adjust from Priority 2’s MUTE SENSE CONTROL
won’t affect the setting.
Step 4. PRIORITY 1+2 signal trigger the Auto Mute:
When the PRIORITY 1 + PRIORITY 2 signal level exceeds the mute trigger threshold, the
LINE 1, LINE 2, LINE 3, LINE 4 to assigned page channel’s output will be mute and route
PRIORITY 1 + PRIORITY 2 signal to output.
Step 5. Release Mute
When the PRIORITY 1 + PRIORITY 2 signal level is below than the mute trigger threshold,
depends on the setting of the HOLD TIME CONTROL, the signal will start to fade in after the
hold time interval is time out.
Note: When PRIORITY MIX 1+2 is on, the hold time is control only from on Priority 1’s HOLD
TIME CONTROL, adjust from Priority 2’s HOLD TIME CONTROL won’t affect the setting.
11. OPERATION
11.1 Input Selection Function
Use the INPUT SELECT SWITCH on the front panel or connect the WP-700 remote module to
REMOTE TERMINAL to select the LINE 1, LINE 2, LINE 3, LINE 4 signal source to CH1, CH2, CH3,
CH4 outputs.
11.1.1 INPUT SELECT SWITCH [Front]
Step 1. Connect different music source (CD players, mp3 players, tape recorders…) to LINE 1,
LINE 2, LINE 3, LINE 4 respectively.
Step 2. Push INPUT SELECT SWITCH on each output channel (CH1, CH2, CH3, CH4) to
route LINE in signal to outputs. Push the selected LINE source again can cancel the
routing (mute).
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toa MM-700F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toa MM-700F in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info