692130
47
Zoom out
Zoom in
Previous page
1/60
Next page
47
1. Function buttons
Press this button to activate the function assigned
to this button.
Following functions can be assigned:
•ChannelOn/Off
•EXTVOL.Gain
•STLineSourceSelect
•MatrixCrosspointAssign
•MatrixCrosspointGain
•PresetMemoryLoad
•RemoteSwitchedOut
•RemoteCommand
•EXTVOL.GainCS(ChannelSelect)
•MatrixCrosspointGainCS(CrosspointSelect)
Function assignment is performed by the PC with
the supplied M-864D PC Software installed. For
details, read the separate Software instructions.
2. Operation indicators
Light if the assigned function is enabled when the
Function button is pressed.
3. Volume set position indicator
Indicates the volume level set with the volume
control knob.
The set level is indicated with 7-point LED.
4. Volume control knob
Adjusts the volume level of the EXT VOL,
Crosspoint gain, or REC OUT VOL.
Channel assignment for which volume level is to be
controlled is performed by the PC with the supplied
M-864D PC Software installed. For details, read
the separate Software instructions.
5. Address selector [ADDRESS]
UsedtosettheZM-9014saddress(0–F).
Set the address value not overlapping with the
value assigned to other ZM Remote controller.
The address number ranges from 0 to 9, and A to
F in numerical and alphabetical order.
6. Data line connection terminals
[LINK A, LINK B]
Connect the communication line from the M-864D.
The communication line has polarities. Match the
polarities of data line connection terminals to those
of the D-864D’s data line connection terminals. As
2 sets of these terminals are internally connected
in parallel, either can be used to connect to other
ZM Remote controller.
7. 24 V DC terminals
Connect the power cable from the M-864D.
25.1.4. ZM-9014 Remote Control Panel
The ZM-9014 performs various controls with the 4 buttons in connection to the M-864D.
It also performs volume control of the assigned input/output channel with the volume control knob in connection
to the M-864D, and also indicates the volume set position of the assigned channel.
It can be mounted in two-gang electrical box.
[Front]
[Side]
1 2 3
4
5
6
7
6
7
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toa M-864D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toa M-864D in the language / languages: English as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info