692130
43
Zoom out
Zoom in
Previous page
1/60
Next page
43
24.2. Removable Terminal Plug Connection
Notes
Avoidsolderingstrandedorshieldedcable,ascontactresistancemayincreasewhenthecableistightened
and the solder is crushed, possibly resulting in an excessive rise in joint temperatures.
• Whenconnecting2cablesorashieldedcabletoasingleterminal,useaferruleterminalwithaninsulation
sleeve to crimp the cables because such cable conductors could become loose.
Recommended ferrule terminals for signal cables
(made by Phoenix Contact)
Recommended ferrule terminals for power supply
cables (made by Phoenix Contact)
Crimping tool: CRIMPFOX UD6-4 (made by Phoenix Contact)
Cable sheath to trim
Model Number a l
1
l
2
AI 0,34-8 TQ
AI 0,5-8 WH
2 (0.08)
Unit: mm (in)
2.5 (0.1)
12.5 (0.49)
14 (0.55)
8 (0.31)
8 (0.31)
b
0.8 (0.03)
1.1 (0.04)
Model Number a
1
l
1
l
2
AI 1,5-8 BK
AI-TWIN 2x1,5-8 BK
6.6 (0.26)
a
2
3.6 (0.14)
14 (0.55)
16 (0.63)2.3 (0.09)
8 (0.31)
8 (0.31)
a
3.4 (0.31)
Unit: mm (in)
b
1.8 (0.07)
Insulation sleeve
Contact section
Insulation sleeve
Contact section
a
l
2
a
1
a
2
l
1
l
2
l
1
bb
Solid cable and stranded cable
Shielded cable
7 mm*
(0.28'') (0.28'')
(0.79'')
7 mm*
20 mm
* Expose 8 mm (0.31’) or more when
using the above ferrule terminal, and cut
off an extra conductor protruding from
the sleeve.
Wiring procedures
Step 1. Wiring the supplied removable terminal
plug.
1-1. Loosen the terminal screws to insert
the wire.
1-2. Tighten the terminal screws.
Ensure that the wire does not break
free when pulled. If the wire does pull
free, repeat the connection procedure
from the start.
Step 2. Insert the wired terminal plug into the
corresponding terminal block in the
unit’s rear panel.
Note
Do not reverse Steps 1 and 2 above. Force is
applied to the connected receptacle pins while
tightening the terminal screw and they may be
damaged, resulting in bad connector contact.
Terminal screw
Removable terminal plug
(accessory)
Tightens Loosens
Slotted screwdriver*
[Terminal plug without fixing screws]
Recommended type of screwdriver with the following blade width:
For terminal plug except 3P type: About 2.5mm (0.1”) wide blade
For 3P terminal plug: About 3.5mm (0.14”) wide blade
*
Bit shape 2.5 mm or 3.5 mm
(0.1”) (0.14”)
1
1
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toa M-864D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toa M-864D in the language / languages: English as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info