692127

Toa D-901 Manual

10
Zoom out
Zoom in
Previous page
1/94
Next page
10
Microphone Bus Control Section
Microphone bus indicator (21) to light, and allows
feedback suppression (p. 54), effect (echo) (p.
55), and bus assignment (p. 56) to be set on the
LCD screen.
21. Microphone Bus Indicator
Remains lit while the microphone bus is selected.
22. Feedback Suppression Indicator [FBS]
Remains lit while the feedback suppression
function is enabled.
23. Effect Key [EFFECT]
The effect (echo) function is enabled when this
key is pressed, and the effect (echo) parameters
are displayed on the LCD screen, allowing
settings to be changed. Pressing the key again
disables the effect (echo) function. (Refer to p.
55.)
24. Effect Indicator
Remains lit while the effect (echo) function is
enabled.
Output Channel Control Section
Note
The indicator lights red when the signal level is
set too high. In such cases, attenuate the unit's
output level so that the indicator lights green.
• SEL: Lights when the output channel is
selected.
27. Output Volume Control [OUTPUT]
Adjusts the gain of the output channel selected
with the Output Channel Selector keys (28).
28. Output Channel Selector Keys [1 – 8]
Used to select the output channel for sound
volume adjustment, parameter setting or Level
meter indication (25). The Output Channel
indicator [SEL] (26) lights when the key is
pressed, permitting parameter setting, volume
adjustment with the Output volume control (27) or
Level meter (25) signal level indication.
29. Output Channel ON/OFF Key [ON]
Enables or disables the channel selected with the
Output Channel Selector keys (28).
30. Output Channel ON/OFF Indicator
Lights continuously to indicate that the output
channel selected with the Output Channel
Selector keys (28) is enabled (ON).
25. Output Signal Level Meter
Indicates the signal level of the channel selected
with the Output Channel Selector keys (28).
26. Output Channel Indicators [ON, SIG, SEL]
• ON: Lights when the channel is active.
• SIG
Indicates the output signal level in two colors
(red and green). The status of indicator shows
as follows depending on the output signal
levels.
Red: Signal level is 17 dB or more above
the rated output signal level.
Green: Signal level is between –40 dB and
+17 dB on the basis of the rated
output signal level.
OFF: Signal level is lower than –40 dB
below the rated output signal level.
ON
8
7
6
5
OUTPUT
4
3
2
1
+12dB
+6dB
0dB
-6dB
PEAK
-40dB
-20dB
-12dB
0N SIG SEL
25
26
27
28
29
30
MIC BUS
FBS
EFFECT
SEL
21
22
23
24
20
20. Microphone Bus Selector Key [SEL]
Used to set the microphone bus parameters or
adjust the volume. Pressing this key causes the
Rated output signal level
+17 dB
–40 dB
Output signal level
LED
Green
Red
OFF
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toa D-901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toa D-901 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info