510682
10
Zoom out
Zoom in
Previous page
1/132
Next page
10
English
9. pq/TUNE +/-: Press to adjust menu items. Use these same buttons to manually tune up or
down when in FM or AM mode. Press and hold to move quickly through the frequencies. A “T”
will show on the display to indicate manual tuning mode. It will take 2 or 3 seconds until the
frequencies begin to change. Press for 1.5 seconds and release to auto scan to the next station
detected. The display will show “ ” when auto scanning in FM and “ ” when auto
scanning in AM.
10. : Press to navigate back or forward through the menu.
11. MENU/SELECT: Press to enter the main menu and press to select items within the menu. For
more, see the section marked “Menu”. Some of the menu items can be accessed regardless
of whether the Model 10 is on or off.
12. MONO: Press to change the Stereo/Mono setting. The display will show “M” for mono or “ST”
for stereo. “Mono” or “Stereo” will also be one of the fields shown when pressing the Info
button on the remote. This setting also affects the headphone output. For more, see the
section marked “FM/AM Reception”.
Menu:
(Press the Menu/Select button briefly. Use the  buttons to navigate through the menu pages
and the pq buttons to change the items within the menu.)
1. TREBLE: Use pq to adjust the treble and press Select to proceed to the next menu item.
2. BASS: Use pq to adjust the bass and press Select to proceed to the next menu item.
3. BALANCE: As the balance control has no effect when the Model 10 is set to Mono, this
setting should remain in the center position, except when the optional Model 10 Speaker is
connected and Stereo mode is selected via the remote control’s “Mono” button. Though we
still recommend the center balance setting in Stereo mode, you may use the pq buttons to
adjust the balance to your liking, and press the Select button.
4. EQ: The equalizer acts as a Loudness control at low volume levels. Use pq to select between
having the EQ on, having the EQ always off, or the EQ off until the Model 10 is turned off (when
it is turned on again the EQ will be on again). Press Select to proceed to the next menu item.
5. DISPLAY OFF: Use the pq and Select buttons to set the display on or off. Setting the display off
will turn the backlight off when the Model 10 is turned off. This may be desirable when sleeping.
While the display is off, pressing a button on the remote will turn the display on for 10 seconds.
6. BACKLIGHT: Use pq to make the backlight brighter or dimmer.
7. CONTRAST: Use pq to increase or decrease the display contrast.
8. CLOCK SET: Use pq to set/change the hour, then press Select. Repeat this process to set/
change the minutes, then press Select to proceed to the next menu item. Use pq to set the
year and press Select to proceed to the next menu item. Use pq to set the month and press
Select to proceed to the next menu item. Use pq to set the day and press Select to complete
the process and return to the source screen.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tivoli Model 10 STEREO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tivoli Model 10 STEREO in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info