504973
47
Zoom out
Zoom in
Previous page
1/51
Next page
43
1. Wählen Sie zuerst den Satelliten aus, von dem Sie die Software
herunterladen möchten.
2. Wechseln Sie auf den Menüpunkt “Start” und bestätigen Sie mit der
OK-Taste. Dieser Vorgang kann bis zu 60 Minuten dauern. Wir empfehlen
daher, das Update nur durchzuführen, wenn Sie nicht vorhaben fern zu
sehen.
3. Es wird empfohlen, nach einer Aktualisierung zusätzlich die
Werkseinstellung zu laden. Dabei gehen Ihre eigenen Einstellungen
verloren.
Der Download vom Satelliten Astra findet vom Transponder 12.604 MHz,
Horizontal, Symbolrate 22.000 KS/s statt.
6.6 SatcoDX Auto-Programmierung
Diese Funktion ermöglicht das Einspielen einer Programmliste mit Hilfe der
aktualisierten Programmlisten von der SatcoDX Homepage.
Sie benötigen hierzu ein spezielles Programm für Ihren PC, welches auf
CD-ROM im Magazin „TeleSatellit International“ erwerbbar ist. Installieren Sie
dieses Programm zuerst auf Ihrem PC.
1. Starten Sie das SatcoDX Programm auf Ihrem PC.
2. Wählen Sie “SatcoDX Datenempfang” an Ihrem Receiver. Auf dem
Bildschirm erscheint die Meldung “OK to Proceed” (Bereit zum Start).
3. Durch erneutes Drücken der OK-Taste erscheint die Meldung “Ready to
Download” (Bereit zum Empfang).
4. Achten Sie nun darauf, dass bei Ihrem PC-Programm die “Baud rate” auf
115200 steht, und starten Sie den Vorgang.
Anmerkung:
Durch das Aufspielen dieser Programmliste werden die bisherigen
Programmlisten überschrieben und sind nicht mehr wieder herstellbar.
6.7 CI
In diesem Menüpunkt finden Sie Informationen über das Conditional Access.
Wenn das CI-Modul nicht oder es nicht richtig eingeführt worden ist erscheint
auf dem Bildschirm "CAM nicht verfügbar". Mit dem korrekt eingesteckten
CI-Modul erscheinen die Kartedaten. Bitte folgen Sie den Anweisungen, die auf
dem Bildschirm erscheinen.
6.8 Kartenleser
Der Receiver ist vorbereitet für ein intergrietes Verschlüsselungssystem.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Titan TX-8200 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Titan TX-8200 PVR in the language / languages: German as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info