477446

Tiptel VP 28 Manual

79
Zoom out
Zoom in
Previous page
1/83
Next page
IP Video Phone Using tiptel VP 28
- 72 -
Step 1
In the conversation with user B, user A clicks the <Transfer> key to hold user B's call.
Step 2
User A dials user C's number.
Step 3
User A performs call transfer.
Blind transfer
Click the <Transfer> key.
User A is held, user B hears the RBT (Ring Back Tone), and user C's phone is ringing.
After user C picks up the phone, user A hangs up the phone to complete the transfer.
If user C rejects the call, a message indicating transfer failure is displayed on the user
A's phone screen. After pressing the <Resume> key, user A resumes the call with
user B.
Semi-attend transfer
Click the <OK> key.
User A hears the RBT. When user C's phone rings, user A presses the <Transfer> key.
After user C picks up the phone, user A hangs up the phone to complete the transfer.
Attend transfer
Press the <OK> key.
User A hears the RBT and user C's phone is ringing. After user C picks up the phone,
user A asks user C whether user C wants to answer user B's call. If user C says yes,
user A presses the <Transfer> key to transfer the call to user C. If user C rejects the
call, user A presses the <Resume> key to resume the call with user B.
Step 4
User B talks with user C.
Three-Party Conference
To establish a three-party conference, you need to use the conference key.
Step 1
User A is talking with user B. User A clicks the <Conference>. User B is held, and user
A hears the dial tone.
Step 2
User A dials user C's number and click .
Step 3
User A listens to the RBT, user B is held, and user C's phone is ringing.
Step 4
When user C picks up the phone, user A only talks with user C. To establish a three-party
conversation, user A clicks the <Conference> again.
Step 5
When user A hangs up the phone, the other two parties' conversation ends automatically.
If Transfer on Conference Hang up is set to Enabled, the other two
parties' conversation continues when user A hangs up the phone. The default
value of Transfer on Conference Hang up is Disabled for tiptel VP 28. For
details, see contents in “Features”.
BLF Function
After the BLF function is assigned to a key, you can learn about the status of other accounts (idle,
ringing, or occupied) on tiptel VP 28. You can directly press the key assigned with the BLF
function to make calls. This requires the support from the server.
For details about how to assign the BLF function to a DSS key, see DSS Key.
When assigned BLF function, the DSS Key will show the status information of the specified
extension. The statuses are as follows:
Table 7-1 Parameters on the BLF
Status
Description
The listened-on account is in the ringing state. And the
DSS Key is red.
The listened-on account is in the talking state or in the
dial status. And the DSS Key is red.
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tiptel VP 28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel VP 28 in the language / languages: Dutch as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tiptel VP 28

Tiptel VP 28 Quick start guide - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info