65750
15
Zoom out
Zoom in
Previous page
1/32
Next page
Functions
15
Hold
There are two ways to place incoming external calls on hold: either externally within
the exchange or internally within your telephone system. The setting in which way
calls are put on hold was performed by the installer of your telephone system.
One of the differences is that if a call has been placed on hold within the exchange,
the external caller hears the music-on-hold selected by the network provider. During
the hold within your telephone system, your own music-on-hold is heard.
Conference
When a subscriber has a call on hold and an active call, he/she can set up a three-
way conference. In this case, the three subscribers will be interconnected within the
telephone system. A maximum of four internal three-way conferences is possible. If
the subscriber initiating the conference hangs up, all connections will be terminated.
If one of the other subscribers hangs up, the connection between the two other
subscribers remains active.
If analogue terminals are used, a three-party conference can be initiated via the
following key sequence:
Initiate conference

If ISDN telephones are connected, this feature can be enabled by the terminal
itself via speed dialling keys. For enabling this feature, please consult the User's
Manual for your ISDN telephone.
In case of two external subscribers, the conference can be initiated within the
exchange, provided that both have been switched via the same S0 connection. It
should be noted in this regard that additional charges can be levied by the network
provider for a three-party conference within the exchange.
Terminal Portability (TP)
If you wish to continue an active call from another part of the building, you can park
the call within the telephone system and remove it from another extension. After
initiating parking, you can disengage parking within three minutes at another
extension and thencontinue the call with the person you are calling.
To programme this feature at an ISDN terminal, please consult the User's Manual
for your ISDN telephone.
If analogue terminals are used, this feature can be initiated as follows:
parking a call:

two-digit parking number

15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tiptel ISDN Centrale 411 Home at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel ISDN Centrale 411 Home in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tiptel ISDN Centrale 411 Home

Tiptel ISDN Centrale 411 Home Quick start guide - English, German - 40 pages

Tiptel ISDN Centrale 411 Home User Manual - German - 49 pages

Tiptel ISDN Centrale 411 Home Quick start guide - Dutch - 40 pages

Tiptel ISDN Centrale 411 Home User Manual - Dutch - 76 pages

Tiptel ISDN Centrale 411 Home User Manual - Dutch - 36 pages

Tiptel ISDN Centrale 411 Home Quick start guide - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info