Manual Tiptel innovaphone ip 110 (page 17 of 40) (English)

300206

Zoom out

Zoom in

1/40

Operating Manual IP Telephone IP110 - 15 -- 15 -

2.9.3 Managing the wait lists

The most important key sequences for handling multiple calls are described below:

Key Effect

Switching from operating mode 2 to operating mode 1:

Press this key to bring the call waiting to the top part of the display

(where active calls are shown) without immediately accepting the

call. This enables you to get more information about the call waiting.

The next call on the wait list then moves up to be the waiting call on

the display and the previous call on hold/call waiting which was in

the top part of the display moves down to the end of the wait list.

Repeated pressing of the key enables you to go through the entire

wait list.

Note:

A call which has been accepted once and then put back

onto the wait list is shown on the display as a call on hold

with the symbol “ x calls waiting”.

Changing from operating mode 2 to operating mode 1:

Press this key to return a waiting/held call to the waiting calls. This

call is then put at the top of the wait list.

Repeated pressing of this key has no effect.

in mode 1

Hold and retrieve:

It is possible for a call previously on hold to be made an active call.

The active call is then on hold.

in mode 2

The call waiting can be picked up directly by pressing the key

sequence. The previous active call is then put on hold.

Note:

The number of calls which can be managed is configured under

Administration. Incoming calls are signalled with a call waiting tone as long

as the limit set in the configuration has not been reached. If the incoming call

limit has been reached then further incoming calls are rejected with a busy

signal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel innovaphone ip 110 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tiptel innovaphone ip 110 Manual

Product: