63373
11
Zoom out
Zoom in
Previous page
1/85
Next page
Setting up
9
You should only use the AC adapter supplied. You should only
use the connection cable supplied.
Batteries in the base station
4 batteries can be loaded into the base station (not supplied). They are used for
power failure protection. This protection is recommended if you are using the
emergency call function. Please use 4 standard batteries (NiMH = Nickel metal
hydride, 1200 mAh and higher).
Only insert recommended, rechargeable batteries of the same type!
Never use ordinary batteries, as this can lead to damage to health or
personal injury. Do not use any other types of chargers. This could
damage the batteries.
Please dispose of used batteries properly (do not thrown them in the domestic
rubbish). The cover of the battery compartment is screwed down for safety reasons.
This means that the compartment cannot accidentally come open and that the
batteries are securely fitted.
Power failure
If the 4 batteries are fitted in the base station and the AC dadapter is disconnected,
the batteries will bridge this power failure. Make sure that the power supply plug
remains always put.
Inserting / replacing batteries in the base station
For safety reasons, disconnect the telephone from the telephone network and the
mains, by removing the telephone plug and the AC adapter were previously
connected. Unscrew the screw on the battery compartment cover using a narrow
Phillips screwdriver. Insert or replace the batteries (NiMH). Ensure that the polarity
is correct. Replace and screw down the battery compartment cover.
Connect telephone to C/O line
The telephone connecting cable has two different plugs. The smaller of them should
be plugged into the socket marked with a telephone symbol on the base of the
telephone. Place the cable in the appropriate cable duct. Plug the TAE plug into
your telephone connections TAE socket (code F).
2
1
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tiptel easyDECT XL2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel easyDECT XL2 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tiptel easyDECT XL2

Tiptel easyDECT XL2 User Manual - German - 86 pages

Tiptel easyDECT XL2 User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info