33
MOBILTEIL-EINSTELLUNGEN
Mit dem Menü "Mobilteil-Einst." können Sie verschiedene Mobilteil-Einstellungen wie zum Beispiel die
Standby-Anzeige oder die Anzeigesprache festlegen. Nähere Informationen zur Fuzzy-Wahl im Menü
"Mobilteil-Einst." finden Sie auf Seite 17.
Mobilteil-Einstellungen
Mit dieser Funktion können Sie festlegen, was im
Standby-Modus auf dem Anzeigefeld angezeigt wird.
Sie haben folgende Wahlmöglichkeiten:
•
TTeexxttmmoodduuss
: Zeigt den eingestellten Mobilteilnamen
an. Wenn Sie keinen Mobilteilnamen einstellen,
wird im Standby-Modus stattdessen die Mobilteil-
und Basisstationsnummer angezeigt.
•
GGrraapphhiikkmmoodduuss
: Zeigt im Standby-Modus eine
vordefinierte Grafik an. So wählen Sie einen
Anzeigemodus aus.
1. Drücken Sie die Anzeige-Taste MENÜ, um
die Einträge des Hauptmenüs anzuzeigen.
2. Wählen Sie mithilfe der Navigationstasten
"Mobilteil-Einst." aus und drücken Sie
die Anzeige-Taste WÄHLEN.
3. Drücken Sie die Anzeige-Taste WÄHLEN,
um die Option "1:Standby Display"
aufzurufen.
Ergebnis: Im Kasten erscheint die aktuelle Einstellung mit
einem Häkchen.
4. Wählen Sie über die Tasten oder
zwischen dem Text- und dem Grafikmodus
aus und drücken Sie die Anzeige-Taste
WÄHLEN.
Ergebnis: Wenn Sie den Grafikmodus auswählen,
speichert Ihr Telefon die Einstellung und kehrt
zur übergeordneten Menüebene zurück. Gehen
Sie in diesem Fall zu Schritt 8 über.Wenn Sie den
Textmodus auswählen, fahren Sie wie folgt fort:
5. Wenn Sie den Textmodus auswählen,
können Sie festlegen, ob der Mobilteilname
(z. B. Ihr Name) angezeigt werden soll.
Wählen Sie über die Tasten oder
die Option AN oder AUS und drücken Sie
die Anzeige-Taste WÄHLEN.
Ergebnis: Wenn Sie AUS wählen, speichert Ihr Telefon
die Einstellung und kehrt zur übergeordneten
Menüebene zurück. Machen Sie mit Schritt 8
weiter. Das Telefon zeigt in diesem Fall im
Standby-Modus die Mobilteil- und Basisstations-
nummer an.
6. Geben Sie über die alphanumerischen
Tasten den Mobilteilnamen ein, der im
Standby-Modus angezeigt werden soll.
HHiinnwweeiiss::
Eine Anleitung zum Eingeben von Text mithilfe
der alphanumerischen Tasten finden Sie auf
Seite 22.
7. Drücken Sie die Anzeige-Taste OK um den
Namen zu speichern.
Ergebnis:
Nach dem Speichern erscheint wieder die
übergeordnete Menüebene.
8. Um das Menü zu verlassen, drücken Sie
die Taste .
Standby-Anzeige einstellen
MENÜ41