34
System settings
Access to the public exchange
The telephone system tiptel 4011 XT/30xx automatically ensures that a line prefix for the access
to the public exchange is entered in the call list of your tiptel 83 system – if necessary. The
following constellations are possible:
Automatic exchange connection has been programmed for the extension number of your
tiptel 83 system: The normal telephone number without any line prefixes is shown in the call list
and must be entered in the telephone book / register.
No automatic exchange connection has been programmed for the extension number of your
tiptel 83 system: The number "0" before the normal telephone number is shown in the call list
and must be entered in the telephone book / register.
Targeted exchange connection has been programmed via the telephone system tiptel 4011 XT
for the extension number of your tiptel 83 system:
Via PC (programming of your tiptel 4011 XT) a code number for targeted exchange connection
has been set for your feature phone (i.e. 9911). This number followed by the normal telephone
number is shown in the call list and must be entered in the telephone book /register (see
chapter "Targeted exchange connection" in the manual of your tiptel 4011 XT).
In this case, no additional line prefix may be entered. Should a line prefix be programmed for
your tiptel 83 system, this must be deleted as follows:
1. Press the or button to select
"settings".
2. Press the button.
3. Press the or button to select
"system".
4. Press the button.
5. Press the or button to select
"CO line".
6. Press the button.
7. Now, enter the line prefix via the
numeric keypad (4 digits as a maxi-
mum).
8. Press the button.
Every time you press the button, the display
switches between the available functions.
The display shows "appointments".
The display shows "system".
The display shows "ISDN".
The display shows "CO line".
The display shows a cursor for entries.
Your entry is displayed.
The entry is stored.
