628562
16
Zoom out
Zoom in
Previous page
1/44
Next page
Quick Installation Guide
16
ISDN- and S
0
system telephones
In factory default settings with tiptel.com 822 XT / Rack S
0
connectors 2-4, with
tiptel.comPact 84 Up4 /b Rack S
0
connectors 3-4 are set to "internal", i.e. they are set
for connecting ISDN or S
0
system telephones.
Please connect ISDN or S
0
system telephones by using the ISDN cables that came
along with those telephones.
With tiptel.com 822 XT and tiptel.comPact 84 Up4 per S
0
port there is only one con-
nector, i.e. you can only connect one ISDN system telephone. To connect more than
one ISDN telephone you will need a suitable ISDN switch or you will have to install an
S
0
bus.
With tiptel.com 822 XT Rack and tiptel.comPact 84 Up4 Rack per port there are two
connectors, so you may connect two ISDN telephones directly.
Notes: You may only operate one S
0
system telephone per S
0
port.
A manual on how to install suitable ISDN switches or how to install an
S
0
bus you will find in the Installation Manual, which can be found on
the CD that came along with your telephone system.
ISDN cables used may not exceed 10 m in length. If the cables are longer then 10 m
at the end of the cable - before the telephone - termination resistors must be in-
stalled. With two telephones connected per port both telephones must be equipped
with termination resistors and the termination resistors which are factory default in the
telephone system must be removed.
Note: A manual on how to install termination resistors you will find in the In-
stallation Manual, which can be found on the CD that came along with
your telephone system.
Configuration of telephones
To operate ISDN and S
0
system telephones at the telephone system, with the tele-
phone the incoming and outgoing MSN must be matched with an internal extension
number which has been configured in the telephone system which applies to the S
0
port.
As factory default for S
0
2 extension number 20 and 21, for S
0
3 extension numbers 30
and 31, and for S
0
4 extension numbers 40 and 41 are pre-configured.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tiptel 822 XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel 822 XT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tiptel 822 XT

Tiptel 822 XT User Manual - English - 32 pages

Tiptel 822 XT Installation Guide - English - 136 pages

Tiptel 822 XT Installation Guide - German - 152 pages

Tiptel 822 XT User Manual - German - 49 pages

Tiptel 822 XT Installation Guide - Dutch - 108 pages

Tiptel 822 XT User Manual - Dutch - 97 pages

Tiptel 822 XT User Manual - Dutch - 36 pages

Tiptel 822 XT Installation Guide - French - 116 pages

Tiptel 822 XT User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info