628560
17
Zoom out
Zoom in
Previous page
1/136
Next page
Connecting the telephone system
17
Connecting the telephone system
Removing the cabinet cover
In case you wish to use port 5 through 8 with telephone systems comprising 8 ana-
logue ports or you wish to jumper ISDN ports from internal to external or vice versa,
or you wish to install or remove terminations resistors of the S
0
ports, or you wish to
install modules you will have to remove the cabinet cover.
Please pay attention to applicable safety regulations, in particular
EN 60950 und VDE 0100!
Removing the cover is done as follows:
At the indicated areas (1) insert a slot screwdriver (4 mm) or a similar tool as far as it
goes from bottom of the housing in the direction towards the top. Pull the screwdriver
towards you (2) which will slacken the snap mechanism and lift the cover towards the
back of the unit.
When refitting the cover please make sure that the rear fittings of the cover are
matching the rear slots of the housing bottom. Now push the cover down at the ter-
minal area until it snaps in.
1 1
22
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tiptel 411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tiptel 411 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tiptel 411

Tiptel 411 Quick start guide - English - 40 pages

Tiptel 411 User Manual - English - 32 pages

Tiptel 411 User Manual - German - 33 pages

Tiptel 411 Quick start guide - German - 40 pages

Tiptel 411 User Manual - German - 49 pages

Tiptel 411 Quick start guide - Dutch - 40 pages

Tiptel 411 Installation Guide - Dutch - 108 pages

Tiptel 411 User Manual - Dutch - 97 pages

Tiptel 411 Additional guide - Dutch - 3 pages

Tiptel 411 User Manual - Dutch - 36 pages

Tiptel 411 User Manual - French - 32 pages

Tiptel 411 Quick start guide - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info