4.5.2.1.Register an Account
Register an account via phone interface：
1. Press the Menu soft key to enter setting interface to select advanced setting, input
password(password: admin) to select account；
2. Select the account you want to set and press the Enter soft key；
3. Select “Enable” in the account activation status area；
4. Input the label, display name, register name, account, password and SIP separately；
5. Press the Save soft key to save or the Back soft key to cancel；
6. Repeat step 2 to 5 to finish all the account register。
4.5.2.2.Disable an Account
1. Access Menu->Settings->Advanced setting->Account (password: admin).
2. Select the account you want to disable and press the Enter soft key.
3. Select “Disable” in the account active status area.
4. Press the Save soft key to save or the Back soft key to cancel.
Note:
1 .The operation and interface of account 2 and 3 is the same as account 1;
2. You can configure multi-account keys for one account. The incoming calls of this account will be divided
equally to different account key; analogously, the dialings also will be divided equally.
4.6. Basic Network Settings
Through the Basic Network setting, you can set the IP Phones to get the IP address by three
ways：DHCP, static IP and PPPoE, also can set the VLAN, PC port mode.
PATH: Menu -> Settings -> Advanced Setting -> Network
4.6.1. DH C P M ode
1. In the Network Settings interface, Press the OK key on the phone keyboard or the Enter
soft key to enter LAN Port：
2. In the LAN Port interface, press the Up or Down key on the phone keyboard to select DHCP
(default is DHCP).
3. Press the Enter on the soft key or the OK key on the phone keyboard to enter the DHCP
switch interface, it will auto return to last interface after seconds.
