17
Telephone calls
Switching between handset and hands-free operation
You are holding a telephone conversation using the handset and want to switch to the hands-
free operation:
1. Press the button and keep it
pressed.
2. Replace the handset.
3. Release the button
1. Pick up the handset.
The hands-free mode is activated.
The hands-free mode is deactivated and you
can continue holding your telephone conver-
sation via the handset.
Headset-operation
It is possible to connect a headset instead of the handset. This makes telephoning in the office
even more comfortable. Remove the curled cable of the handset from the corresponding
receptacle and replace it by the relevant headset connecting cable. The handset can either be
removed or remain on the telephone.
The function "connection set-up" must have been assigned to one functional key (refer to chapter
macro programming).
You receive an incoming call:
1. Press the key "connection set-up".
2. At the end of the telephone call,
press the key "connection set-up"
anew.
You make an outgoing call:
1. Press the key "connection set-up".
2. Enter the phone number.
3. At the end of the telephone call,
press the key "connection set-up"
anew.
The call is accepted via the headset.
The call is being disconnected.
The headset is switched on.
The telephone starts dialling.
The call is being disconnected.
