7
Installation
Before installing the internal wiring, disconnect the AC adapter and the telephone plug.
Local telephone network restrictions must be observed when installing.
Changes in the telephone system may only be made in so far as they are described in the
operating instructions.
Any equipment (for example, telephones, answering machines, and fax machines) which are to
be connected to the telephone system must be approved by the relevant authorities.
The installation must be completed professionally.
This PABX has a CLIPfunction. It will work solely on networks using the most common CLIP
standard in Europe (e.g. Germany, Austria, Switzerland, France, Belgium).
Reach of the internal wiring
The reach of the internal wiring is dependent on the diameter of the telephone cables used. A
maximum of 60 ohms in both directions are allowed on the line at anyone time. This maximum
of 60 ohms corresponds to an installation wire length of:
0,4 mm diameter : 200 m reach
0,6 mm diameter : 450 m reach
0,8 mm diameter : 800 m reach
Telephone numbers of the extension
Extension 12345678
Number 21 22 23 24 25 26 27 28
