9
Telephone sets
Telephones with either tone or pulse dialling can be connected. The telephone system will auto-
matically recognise the tone/pulse setting. The telephones, from which you make outgoing calls,
must have the same dialling mode as the local network. If the dialling mode does not correspond
to the telephone network you will only be able to make internal calls. For telephone sets with tone
dialling, a recall button is necessary when placing a call on hold to make inquiries. Telephone
sets with pay-phone indication will display the toll for CO line calls.
Note: When an external call is placed on hold the pay-phone indication will stop, and the toll is
not counted. In this case, the real toll will not correspond with the indicated toll. The
minutes on hold are not counted, but you will be charged for the time placed on hold.
To store an external telephone number in the memory of your telephone you must first enter a
“0”, then a 2 second pause followed by the telephone number. Cordless telephones can be
connected to all extensions.
Connection of other telecommunication equipment
Other telecommunications equipment, for example answering machines, fax machines, tele-
phone computers, modems, etc. can be connected to the extensions 1 through 8. Only type
approved devices have to be connected.
Connection of devices with CLIP function
This PABX supports CLIPfunctionality solely for devices using the most common CLIP standard
in Europe (e.g. Germany, Austria, Switzerland, France, Belgium). Other devices may not work
properly regarding CLIP.
Connection of devices with CNIP function*
This telephone system supports the transmission of names in addition to the phone number. The
FSK-CLIP mode which is most frequently used allover Europe (e. g. Germany, Austria,
Switzerland, France, Belgium) is applied for this purpose (message type 80h, parameter 07h). If
devices are operated that do not work according to this standard, a name will most probably not
be displayed in case of an incoming call. Please note that your network operator also has to
transmit the CNIP information according to this standard.
Connection of devices with MWI-function (message waiting indication)*
This telephone system uses the MWI function of the network operator in order to signal new
messages received by your network-answering machine. The FSK-CLIPmode which is most
frequently used allover Europe (e. g. in Germany, Austria, Switzerland, France, Belgium) is
applied for this purpose (message type 82h, parameter 0Bh). If devices are operated that do not
work according to this standard, a corresponding message will most probably not be displayed
in case of an incomig call. Please note that your network operator also has to transmit MWI-
information according to this standard.
* This function is not available for all country versions of your telephone system. For details, please contact your local retailer or
the importing company.
