49
Programmable parameters
Once a function has been programmed it will be saved even in the case of a power failure. With
the day/night mode you can store two sets of functions which can be called up as necessary, for
example one program for day and the other for night.
The system is factory pre-set to the day mode.
To switch between day and night mode
The following functions can be programmed:
- door opener authorisation
- doorbell ring
- direct connection with the door intercom
- CO line ring
- CO line access
- Limiting long distance call (0...) access
- Dialling restrictions access
1. Pick up the handset from extension
21.
2. Dial the program code number
19999 .
3. Dial 89 (night program).
4. Dial 88 (day program).
5. Replace the handset.
You hear the telephone system’s dial tone.
You hear the acknowledgement signal.
After switching mode you can program the
functions below and call them up as
necessary.
With this switch you return to the day
mode.
The programming is finished.
