Side 5
Operating your In-Car DAB+ Digital Radio Receiver:
1. Mount the TINY AUDIO C6 In-Car DAB+ Radio receiver to
the dashboard using the provided adhesive holder.
2. Connect one end of the USB power supply cable to Micro
USB socket in TINY AUDIO C6 and the other end to dual
USB car charger. Plug the dual USB car charger to the car
cigar-lighter socket.
3. Connect the antenna to the antenna jack. ATTENTION!
Proper antenna installation is very important for a good
result. See tips page 17.
4. Turn on the power with the “POWER SWITCH” and the
display will show “Tiny Audio” logo, then the device will
automatically scan all the local DAB/DAB+ channels and
store them in the memory of the device until another
“Auto Scan” is performed. During scanning, a scan moving
bar will be shown in the display to indicate the progress
and the total number of channels received.
5. Once it is scanned, you can select any DAB+ radio
channels by the Tuning Knob.
Receive signal from the In-Car DAB+ radio through line out
cable:
1. Press and hold “MENU” button to enter menu mode, use
Tuning Knob to search for “AUX IN/OUT Select” and
confirm by pressing Tuning Knob. Use Tuning Knob to
