644246
5
Zoom out
Zoom in
Previous page
1/104
Next page
5
SETTING UP THE USER PROFILE
Enter your gender, age, weight, and height to ensure accurate calorie calculations.
1. Press MODE until SET displays.
2. Press + or - to select USER, then press OK.
3. Press + or - to select gender, then press OK.
4. Repeat step 3 for age, weight, and height.
5. Press MODE to exit.
TURNING ON THE GPS
Before you can use the watch to collect speed, pace, and distance data, you must turn on the GPS and ac-
quire a satellite fix.
1. Take the watch outside and away from buildings and tall trees.
2. Make sure the watch is facing the sky; do not block the GPS antenna in the bottom part of the watch face.
3. Stand still.
4. Press and hold ON/OFF.
The icon flashes when the GPS is searching for satellites. It turns solid when the fix is achieved,
and more “bars” in the icon indicate a stronger fix.
NOTE: Heavy cloud cover or rain may make it difficult to acquire a satellite fix.
USING RUN MODE
Use Run mode when you need to be able to view speed, distance, pace, or calorie data while a workout is
in progress. You might want to view this data to help you build endurance at a specific speed, or to focus on
completing a 5k race within a particular goal time. You cannot view data for your current lap from Run mode.
Run mode and Chrono mode share the timer, so you can switch freely between the two modes while the
workout is running by pressing MODE. Switch to Chrono mode if you want to view lap data.
NOTE: You can take splits in Run mode, but you can view individual lap data only in Chrono mode.
When the workout is running, several types of information about the workout are displayed:
Workout time • Speed
• Distance Calories burned
• Pace Current time
NOTE: For the most accurate speed, distance, and pace calculations, use the watch in clear weather.
STARTING, STOPPING, AND SAVING A WORKOUT
STARTING A WORKOUT
1. Press MODE until RUN displays.
2. Press + or - to select GPS (to use the GPS to record workout data) or INDOOR (to record time data only),
then press OK.
A battery life message appears. Press OK to acknowledge it. If the battery life is too low, charge the watch
as described in Charging the Watch.
A memory remaining message appears. Press OK to acknowledge it. If there is not enough estimated
memory remaining to record your intended workout, delete some workouts to free memory space as
described in Deleting Workouts.
3. Press START.
CHANGING THE DISPLAY VIEW
While a workout is in progress, you can cycle through several view screens that each display different data
about your workout.
There are four displays in Run mode. All of the displays show the elapsed time and the total distance traveled,
but data in the third line of the display is different for each. The first shows current pace, the second shows
current speed, the third shows calories burned, and the fourth shows the primary time zone.
Use the displays to know how to change your workout to achieve your goals. For example, if your pace is too
fast, you may get tired before your run is complete. Slow down to make your time goal and still finish the run.
Press VIEW to cycle through the display views.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Timex W293 Ironman Easy Trainer GPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Timex W293 Ironman Easy Trainer GPS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info