466713
3
Zoom out
Zoom in
Previous page
1/117
Next page
2
ENGLISH 222-095001-03
Congratulations on purchasing your TIMEX® watch. Please read these
instructions carefully to understand how to operate your Timex timepiece.
Your watch may not have all of the features described in this booklet.
For more information, please visit: Timex.com
HOW TO START YOUR WATCH
To start your watch remove the plastic guard from under the crown, then press
the crown in against the case. The second hand will begin advancing in
one-second intervals.
Some deep-depth water-resistant watches require the setting crown to be
screwed in to secure water-resistance. If your watch case has a protrusion
with screw threads, the crown must be screwed in after setting the watch.
To screw in, push the crown firmly against the threaded protrusion and hold
in while turning the crown clockwise. Continue to screw in the crown until it is
tight. You will need to unscrew the crown (counter-clockwise) before pulling it
out the next time you want to set your watch.
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking (WR_M) is indicated.
Water-Resistance Depth p.s.i.a. * Water pressure Below Surface
30m/98ft 60
50m/164ft 86
100m/328ft 160
200m/656ft 284
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOUR
WATCH IS INDICATED AS 200 METER WATER-RESISTANT.
1. Watch is water-resistant only as long as crystal, crown and case remain
intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to salt water.
4. Shock-resistance will be indicated on the watch face or caseback. Watches
are designed to pass ISO test for shock-resistance. However, care should be
taken to avoid damaging the crystal.
INDIGLO® NIGHT-LIGHT
Press button or crown to activate light. Electroluminescent technology used in
the INDIGLO® night-light illuminates entire watch face at night and in low light
conditions.
ANALOG/DIGITAL MODELS
4-PUSHER ANALOG/DIGITAL MODEL WITH INDIGLO® NIGHT-LIGHT
AND NIGHT-MODE® FEATURE
“B” PUSHER
“C”
CROW N
POSITION
PUSHER
“D”
A B
PUSHER
“B”
PUSHER
“A
PUSHER
“C”
CROW N
POSITION
PUSHER
“D”
A B
PUSHER
PUSHER
“A”
TO USE INDIGLO® NIGHT-LIGHT
1. PRESS pusher “B” to illuminate the entire dial (Both analog and digital).
TO USE NIGHT-MODE® FEATURE
1. PRESS and HOLD pusher “B” for 3 seconds until you hear a beep.
2. Pressing any pusher will cause the INDIGLO® night-light to illuminate and
stay on for 3 seconds.
3. NIGHT-MODE® feature will last for 3 hours.
4. To deactivate NIGHT-MODE® feature PRESS and HOLD pusher “B” for
3 seconds.
ANALOG TIME
TO SET ANALOG TIME
1. PULL the crown out to the “B” position.
2. TURN the crown either way to the correct time.
3. PUSH in the crown to the “A” position.
DIGITAL DISPLAY
1. The Digital display changes to each function every time you PRESS pusher
“A”. (As illustrated below):
TIME / CALENDAR
DAILY ALARM
COUNTDOWN TIMER
CHRONOGRAPH
DUAL TIME
START
Press and release MODE
button once.
DUAL TIME CHRONOGRAPH
COUNTDOW N
TIME/
CALENDAR
DAILY
ALARM TIMER
CALENDAR
HOUR MINUTE SECOND MONTH DATE DAY
Press and release MODE
button once.
Press and release MODE
button once.
TO SET TIME / CALENDAR
1. PRESS pusher “A” to bring up TIME / CALENDAR display.
2. PRESS and HOLD pusher “D”. HOLD will display until second flashes.
3. PRESS pusher “C” to reset to second to “00”.
4. PRESS pusher “A” to let hour flash.
5. PRESS pusher “C” to advance hour.
6. PRESS pusher “A” and “C” as above to adjust tens of minutes, minute, year,
month, date, day and 12/24 hour format.
7. PRESS pusher “D” to complete setting.
8. View or select the TIME or CALENDAR to appear in your digital display.
PRESS pusher “C” to view the CALENDAR for 2 seconds.
PRESS and HOLD pusher “C” for 3 seconds until the watch beeps to
change the display to CALENDAR.
To view or change the display to TIME, repeat the steps above.
NOTE: “A” or “P” will appear when the 12-Hour format is selected.
Set this time to coordinate with the Analog time or another time zone.
PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast
advance.
FOLLOWED BY
THE CURRENT
ALARM SETTING
TIME AND TIME
ZONE.
WILL
APPEAR
FOR 3
SECONDS
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Timex W223 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Timex W223 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 8.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Timex W223

Timex W223 User Manual - English, Dutch - 277 pages

Timex W223 User Manual - Dutch - 29 pages

Timex W223 User Manual - French, Italian - 277 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info