636054
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
Operation
Note: This manual covers the features added with the SC version of the PK-232.
The main PK-232 manual describes the modes and features found in the
original PK-232 and PK-232MBX. The DSP manual supplement describes
the DSP board features.
PC USB Connection
Connect the PK-232SC to an USB 2.0 compatible port on a computer with a single USB cable (USB miniB
to USB A). No other computer connections are required. The computer USB port must be capable of
supplying full USB power (5.0 Volts @ 500mA.) If a USB hub is used, it must be a powered hub.
USB device driver
The device drivers for Windows XP/VISTA/7 will load automatically when the PK-232SC is connected to
your Windows PC if it is connected to the internet. The drivers are also found on the CD distributed with
the PK-232SC and on the Timewave web site (
www.timewave.com.) Other drivers are available for Linux
and Apple computers. Please contact Timewave or visit the Timewave website for further information.
Note: This device driver is different from previous PK-232/USB device drivers. The older drivers will not
work for the PK-232SC.
Power
Connect the PK-232SC to a +13VDC @ 750 mA. power supply. Press the PK-232SC power switch to the
IN position. This connection is the same for all models of the PK-232.
Radio
Connect your radio data audio input, data audio output and PTT line to the PK-232SC Radio 1 or Radio 2
ports. This connection is the same for all models of the PK-232. If you are upgrading your PK-232MBX
to a PK-232SC, you can use your existing cable if you do not change radios. This connection is the same
for all models of the PK-232.
PK-232SC Ports
The PK-232Sc has two COM ports, a USB Audio sound card port and 2 USB ports.
The PK-232 terminal program uses the “standard” COM port to control the PK-232SC operation.
The PK-232SC rig control program uses the “enhanced” COM port to control your transceiver.
The PK-232SC sound card mode programs use the “USB Audio Codec” to run sound card
programs.
The PK-232SC USB ports appear on your computer USB port list and can be used for USB 2.0
compatible USB devices.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Timewave PK-232SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Timewave PK-232SC in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info