631522

Time 2 Bluetooth Blood Pressure Monitor Manual

9
Zoom out
Zoom in
Previous page
1/18
Next page
8
Taking a Reading
Press the START/STOP button to begin the reading, the monitor
will automatically start to measure your blood pressure. Please
remain still whilst the monitor works.
The cuff will start to inflate and the rising pressure in the cuff will
be displayed on the screen.
Once a suitable pressure has been reached, the cuff will stop inflating and gradually
loosen. The drop in pressure will also be displayed on the screen.
In case the cuff pressure is insufficient, the device will
automatically re-inflate to a higher pressure.
When the monitor detects a pulse, the heart symbol on the screen
will start to flash.
Once the reading has completed, the systolic, diastolic and pulse
rate will appear on the screen.
The reading will be remain on the screen until the device is turned
off. The monitor automatically switches off if unused for 3 minutes.
If an irregular heartbeat is detected during the measurement. The
symbol will appear on the screen.
Discontinuing a measurement
If for any reason you would like to discontinue with the measurement, press the
START/STOP button. The cuff pressure will reduce immediately.
Memory-recall of measurements
The monitor automatically stores 2 x 90 sets of readings. The oldest record will be
overwritten by the most recent reading when it exceeds 90 readings per user.
Measurement record
Press the M button when the monitor is turned off to bring up an average of the last 3
readings. Press the M button again to bring up the most recent reading. Continue
pressing the M button to see previous readings.
Permanently delete all measurements
If you would like to permanently remove all stored memory. Press
the S button 7 times until the CL sign appears on the screen.
Thereafter press the START/STOP button, the CL sign will flash 3
times then clear all stored data. In order to check whether the data
has been cleared, press the M button again. and ‘NO’ will
appear on the screen.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Time 2 Bluetooth Blood Pressure Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Time 2 Bluetooth Blood Pressure Monitor in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info