676538
7
Zoom out
Zoom in
Previous page
1/82
Next page
- PODRĘCZNIK UŻYTKOWNIKA
1/10
User Manual
TECHNICAL FEATURES
1 Action buttons
2 D-Pad
3 MAPPING button (for programming)
4 Select button
5 Start button
6 LED
7 2 digital gearshift levers
8 Action buttons
2/10
10 Pedal set
11 Pedal set connector
12 Table clamp
13 NGC connector (for GameCube™ and Wii™)
14 USB connector (for PC and PlayStation®3)
15 GAMEPORT connector (for PlayStation®2)
INSTALLING THE WHEEL
Fixing the wheel in place (12)
1. Place the wheel on a table or other flat surface.
2. Insert the shorter end of the threaded rod into the hole at the base of the wheel.
3. Slide the V-shaped piece onto the threaded rod so that the jaws of the V clamp against the table.
4. Place the clamp screw on the threaded rod and tighten the screw until the wheel is perfectly stable.
Be careful not to turn the screw too tightly, as you risk damaging the table clamp or the table.
Connecting the pedal set
1. Connect the pedal set (10) to the pedal set connector (11).
3/10
ADVANCED FUNCTIONS
ADJUSTING THE WHEEL’S SENSITIVITY
Your wheel’s steering has 2 sensitivity modes:
- Normal sensitivity (the default mode)
- High sensitivity (must be selected)
Selecting “High sensitivity” mode:
Action
LED
Simultaneously press and release:
the D-Pad (2) + the 2 UP and DOWN levers (7)
OFF
Your wheel’s steering is now more sensitive.
(You must repeat this procedure after each restart or disconnection of your wheel.)
Selecting “Normal sensitivity” mode (the default mode):
Action
LED
Simultaneously press and release:
the D-Pad (2) + the 2 UP and DOWN levers (7)
ON
Your wheel’s steering has now returned to normal sensitivity (the default mode).
PROGRAMMING THE WHEEL AND PEDALS
Your wheel is fully programmable:
- All buttons, the D-pad and the Up and Down levers can be switched between themselves.
- All buttons, the D-pad and the Up and Down levers can be programmed onto the 2 pedals.
Examples of possible applications:
- On PS2 and PS3: Program L2/R2 onto the 2 Up and Down digital levers.
- Switch different buttons for greater accessibility.
- On PS3: Program Cross/Square or L2/R2 onto the pedals.
- On GameCube™ and Wii™: Program L/R onto the pedals.
- Program a button(s) onto one or both of the 2 pedals.
Programming procedure
Steps
Action
LED
1 Press and release the MAPPING button (3)
FLASHES
SLOWLY
2 Press and release the button to be programmed.
FLASHES
QUICKLY
3
Press and release the button or pedal onto which you wish to
place your function.
ON
Your programming is now effective.
4/10
To erase your programming
Step
Action
LED
1
Press and hold the MAPPING button (3) for 2 seconds.
FLASHES
QUICKLY AND
TURNS BACK ON
Your programming is now erased.
Note:
Your programming is not saved: you must carry out the programming again after each restart or
disconnection of your wheel.
TROUBLESHOOTING AND WARNING
My wheel doesn’t function correctly or appears to be improperly calibrated:
- Switch off your computer or your console, completely disconnect your wheel and all of its cables, then
reconnect everything and restart your game.
- In your game’s “Options / Controller / Gamepad” menu: Select the most appropriate configuration
(according to the default or programmed mapping on your wheel).
- Please refer to your game’s user manual or online help for more information.
- Never move the wheel or pedals when connecting your wheel, to avoid any calibration problems.
My pedal set doesn’t function correctly:
- Reconfigure your wheel in your game’s “Options / Controller / Gamepad” menu.
- You can also use your wheel’s mapping function to assign new functions to the pedals to resolve this
type of problem.
My wheel’s steering is not responsive enough:
- Switch your wheel to “High sensitivity” mode.
5/10
NINTENDO ® WII™ & GAMECUBE™
INSTALLATION ON NINTENDO® WII& GAMECUBE
1. Switch on your console.
2. For the Wii™: Open the “Nintendo® GameCube™ Controller” hatch located on the top of your console.
3. Connect your wheel’s GameCube™ connector (13) to port #1 on your console.
4. Launch your game (for the Wii™: use your Wii Remote™ to launch and exit the game).
You are now ready to play!
IMPORTANT NOTES FOR NINTENDO® Wii™
You wheel will be compatible :
- With most Virtual Console™ games
(available for download from the Wii™ Shop Channel)
- With all GameCube games (that are compatible with your Wii™ console).
- Never connect the USB connector (14) to your Wii™ (to avoid the risk of damaging your wheel or your
console).
DEFAULT MAPPING FOR BUTTONS AND PEDAL SET ON GAMECUBE™ AND WII™
By default, your pedal set corresponds to the digital “B / A” buttons. Using the MAPPING
button (3), you can also program the “L / R” triggers onto the pedal set for progressive
acceleration and braking.
(To do so, if necessary, modify the “control options” in your game’s interface.)
6/10
PLAYSTATION® 2
INSTALLATION ON PLAYSTATION® 2
1. Connect the PS2 Gameport connector (15) to port #1 on your console.
2. Switch on your console and launch your game.
Your wheel’s LED lights up in red.
You are now ready to play!
IMPORTANT NOTES FOR PLAYSTATION® 2
- In certain driving games, don’t hesitate to test out your wheel’s 2 sensitivity modes in order to optimize its
precision and responsiveness.
- On PSOne™, press “START + SELECT” simultaneously to switch between Digital and Analog modes.
- Never connect the USB connector (14) to your PlayStation® 2 (to avoid the risk of damaging your wheel or
your console).
DEFAULT MAPPING FOR BUTTONS AND PEDAL SET ON PLAYSTATION® 2
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thrustmaster Universal Challenge 5-in-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thrustmaster Universal Challenge 5-in-1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info