745836
5
Zoom out
Zoom in
Previous page
1/29
Next page
LANDSCAPE, LIVORNO, LEVANTO
5
2.9 Problem sources and their solving
In case of failures (e.g. smoke) appearing during operation, contact your local competent chimney sweeper. If damage is
caused to the fireplace, contact the shop where you purchased the fireplace. These are the most common failures, their
sources and solutions:
Type of failure
Possible cause
Solution
Smell creating
Used protective paint drying
out, evaporation of oil
residues.
Operate the fireplace according to the operation manual for few
hours at low power. Then heat for few hours at maximum power.
Too low thermal
power
Selected power is too small.
Insufficient chimney blast.
Smoke tube is incorrectly
connected.
Let the heat necessity be checked by an expert.
Chimney blast must be at least 12 Pa! Check the chimney for
tightness. Doors of other devices connected to the chimney must be
closed tight. Ensure tightness of cleaning covers. Possibly use 1,5 m
long vertical smoke tube (slope path).
Check the smoke tube.
Fireplace reeks
and smokes
Smoke is insufficiently drawn
away (obstructed chimney or
return flow in chimney).
Chimney is too weak.
Combustion of wet wood.
The cause is nearly always in the area of combustion gases route.
Check the smoke tubes and chimney blast, if possible, consult a
chimney sweeper.
Only use well dried wood.
Glass in stoker
door gets
quickly dirty with
soot
Incorrect combustion, e.g.
wet wood.
Smoke is insufficiently drawn
away (obstructed chimney or
return flow in chimney).
Only use well dried wood.
Check the smoke tubes and chimney blast, if possible, consult a
chimney sweeper.
Fireplace heats
too strong
Sealing of stoker door is
damaged.
Change the seal.
Curl of smoke,
puff of smoke
Sometimes obstructed
chimney or return flow in
chimney.
When all air suppliers are
closed.
Too much fuel in hearth.
Consult a chimney sweeper.
During operation, all air suppliers cannot be closed.
Only add one layer.
Damage to grate
Grate is burnt through, or
scaled.
Burning of grate is always caused by full ash box. Empty ash box.
2.10 Accessories list
- protective glove
- manipulating handle
2.11 Spare parts list
- stoker door
- stoker door glass
- stoker door gasket
- stoker door handle
- vermiculittes set
- ash box
- cast-iron grate
- steel grate for saving of glass
Only use these spare parts.
3. Warranty
If a failure of function or failure of surface coating appears during the warranty period, never repair it yourself. Warranty and
after-warranty repairs are performed by the manufacturer.
We guarantee for the quality, function and elaboration of the fireplace for the period of 2 years from the date of purchase by
customer, in terms that all failures undoubtedly caused by incorrect manufacturing we repair in short time at our own expense,
under the condition that the fireplace:
- was operated exactly according to the manual
- was connected to the chimney according to the standards
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thorma Landscape at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thorma Landscape in the language / languages: English, German as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info