Manual Thorens TD 2035 (page 32 of 56) (English, German, French)

582496

Zoom out

Zoom in

1/56

Further Tonearm Adjustments

The vertical tracking angle (VTA) can be adjusted by

raising or lowering the entire tonearm. Loosen the lock

nut (TD 2015 ➔ Fig. 8a) or the adapter screw (TD 2035

➔ Fig. 8b) on the underside of the turntable; then turn the

adjustment ring above the base to raise or lower the

tonearm as required.

If the VTA is changed, the tonearm lift will need to be

to be readjusted. Loosen the locking screw on the to-

nearm lift with a 1.5-mm hex key and carefully raise or

lower the entire lift. ➔ Fig. 9

The tonearm tube should be parallel to the platter

surface. Small adjustments of the VTA or the tonearm

lift height can have a large effect. After making any

changes, you should therefore always check whether

there is enough clearance (at least 1 mm) between

the cartridge and the record (when the lift is engaged)

and between the tonearm lift pad and the tonearm

tube (when the lift is disengaged).

Fig. 9

Fig. 8bFig. 8a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thorens TD 2035 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thorens TD 2035 Manual

Product: