658736
30
Zoom out
Zoom in
Previous page
1/121
Next page
GB
30
8.Press and the appliance will begin the cycle.
- If the delay timer is set, the delay hour indicator light will flash. After the delay
time has elapsed, the appliance will begin the cycle. See the section of “Delay function” below.
- To pause, press again.
9. When the cycle has finished, the machine will beep and the display will show ”End.
10. Open the door and remove the laundry.
Delay function
You can use this function to delay the start time of a programme.
After a programme is selected, repeatedly press to set the desired time and then
press . The time will flash and the symbol will appear on the display.
- The maximum delayed time is 24 hours.
- Each time you press the button, the start time will be delayed by one hour.
- To cancel the time delay, repeatedly press until the display shows ”0h.
Départ
différé
/
Départ
différé
/
Signal function
You can use this function to turn on or off the sound made when the buttons are pressed.
Press and hold for 3 seconds and the symbol will appear on the display
to indicate the signal function is activated.
To deactivate this function, press and hold the button again for 3 seconds and will disappear
from the display.
3 sec.
/
3 sec.
Programme memory function
1.Turn the knob to select a programme to be memorised.
2.Press and hold for 3 seconds to memorise the programme.
3.Turn the knob to the Mem. Prg position and the memorised programme will be selected.
3 sec.Mem.Prg
/
Essorage
3sec.Mem.Prg
The default factory memory programme is cotton( / Coton).
ECO function
The function is only available when the Cotton programme and washing temperature 40°C/60°C
are selected.
Press ECO and then . Your clothes will be cleaned using less energy.
Option function
This function is used for extra functions. The extra functions below are available.
Prewash: Select this function to get an extra wash before main wash.
Extra rinse: Select this function to go through extra rinse.
Downloaded from www.vandenborre.be
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson WT 1408E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson WT 1408E in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 10,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info