706696
14
Zoom out
Zoom in
Previous page
1/56
Next page
- EN 5 -
Pairing the Device:
1. Place the speaker near the Bluetooth-enabled device and switch the speaker on.
2. Press and hold the Bluetooth button to put the speaker into pairing mode if it is not already in
search mode. The LED next to the Bluetooth logo will start ashing.
3. Go to the Bluetooth settings on your device.
4. Select the Bluetooth name “WS06IPB ”. If your device asks for a passcode enter ‘0000’
5. The Bluetooth LED remains fully lit when pairing is complete and a sound prompt conrms it is
paired.
6. The speaker will automatically pair to the last device it was paired to when it powers on again. If no
known device is found, it will enter pairing mode again.
Aux Function:
For other compatible music player devices, or MP3 players, please use the auxiliary audio line cable
(included) to connect from your external device’s “LINE OUT” jack to the “AUX-IN” jack of this speaker.
The speaker will beep when a cable is attached and the left side LED will slowly ash.
Receiving/rejecting Calls:
While in wireless mode, press the Call button to accept an incoming call.
Press the Call button again to end the call.
You can also recall the last used number by pressing this button.
You only can reject a call from your device and not from the speaker.
Please check below for the full LED light status indications.
Note that if the speaker is only operating on battery, the Blue \ Red LED will only display the blue
colour.
Working status Bluetooth LED Indicator
(Blue/Red)
Wireless charging LED
Indicator (Green/Red)
Power on Blue\ Red LED quickly
Flashing
Red LED constant
Bluetooth pairing mode Blue \ Red LED quickly
Flashing
No Change
Bluetooth connected
successfully
Blue LED constant No Change
Play music Blue \ Red LED slow Flashing No change
Pause Blue LED constant No change
Make call via Bluetooth Blue LED constant No change
AUX In Mode Blue \ Red LED light ash No change
USB charging for other
device
No change according to the
current state
No change
Use AC adaptor to charge
speaker
Red LED constant ,Blue LED
No change according to the
current state
No change
Speaker full charged Red LED off No change
Put the Phone on wireless
charging area
No change according to the
current state
Green LED constant
Phone full charging No change according to the
current state
Red LED constant
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson WS06IPB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson WS06IPB in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info