Manual Thomson WHP5305BK - A305 - 131970 (page 6 of 74) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Portuguese, Spanish, Finnish)

644913

Zoom out

Zoom in

1/74

9. Getting Started

9.1 Connecting headphones to the transmitter

• Turn on the audio source connected to the transmitter (TV

or audio player). The green LED will now shine steadily.

• Put the on/off switch of the headset receiver in the ON

position. Now the green signal display LED will light up.

• Set the volume to the desired level.

• When the battery’s charge runs low, the green signal

display LED on the headset will begin to ash.

Note

Before using the headphones for the rst time, make

sure that the battery is fully charged. Charge the battery

for at least 3 hours before the rst use. Make sure that

the headphones are switched off during charging.

The transmitter will automatically switch off if it receives

no audio signal for approx. 5 minutes, or if the signal from

the audio source is too weak for awless reception. As

soon as the signal strength is sucient, the transmitter will

automatically switch back on.

9.2 Connecting two headphones to the transmitter

(requires additional headphones (00131971) in

combination with the base set (00131970))

• Switch the power switch to OFF on both pairs of

headphones and the transmitter.

• Switch both pairs of headphones to ON. The green LEDs

will ash.

• Press and hold the MIC buttons on the headphones for

about 5 seconds. The green LEDs on the headphones

should ash rapidly. Now switch the transmitter to ON

as well.

• The headphones and the transmitter will now be

automatically coupled, and the green LEDs on the

headphones will remain lit.

Note

Both headphones will automatically reconnect to the

transmitter even after being switched off.

10. Charging, g. 4

• Put the on/off switch of the headphones in the OFF

position.

• Place the headphones on the transmitter station and

make sure that the charging contacts are touching the

charging pins.

• Charging begins automatically. The LED display will

light up steady red. When the LED changes from red to

green, the battery is 80% charged. The headphones must

remain on the charging station for at least an hour to

fully charge.

Note

• To prevent damage to the batteries, always switch off

the headphones when they are not in use.

• Before using them for the rst time, the batteries

should be fully charged. To guarantee an acceptable

charge, the batteries should initially be charged

for 3 hours. Make sure that the headset receiver is

switched off during charging.

11. Speech/sound clarity, g. 5

If necessary, the headset receiver’s speech/sound clarity can

be optimized and adjusted from 1 to 3 using the orange

LEDs on the transmitter.

Simply press the pictured button to adjust the speech/sound

clarity.

The speech (and sound) clarity can be improved by making

the following adjustments on the transmitter:

Setting

Orange LED

display

Effect

Standard

3 2 1

Neutral

3 2 1

Amplified bass and

treble

3 2 1

Amplified treble

3 2 1

Amplified bass

12. Troubleshooting

12.1 No sound

• Check that the power supply plug is fully inserted into the

mains socket and the other end is properly connected to

the power supply socket on the transmitter.

• Make sure that the power on/off switches on both the

transmitter and the headset receiver are in the ON position.

• The headset receiver’s battery may have insucient

remaining charge. Charge the battery.

• Check that your TV, hi- system or audio source is

switched on and a channel is correctly congured to send

an audio signal.

• Increase the volume using the control on the headset receiver.

• The connected audio/video device may not be in playback

mode. Please start the playback.

• The output volume of the audio source may be too low.

Set the volume.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson WHP5305BK - A305 - 131970 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson WHP5305BK - A305 - 131970 Manual

Product: