644928
5
Zoom out
Zoom in
Previous page
1/72
Next page
3
•Once the charging process is complete, the indicator
LED goes out.
•Disconnect all cable and mains connections after use.
5. Operation
5.1 Bluetooth pairing
Note Pairing
•Make sure that your Bluetooth-capable terminal
device is on and Bluetooth is activated.
•Make sure that your Bluetooth-capable terminal
device is visible for other Bluetooth devices.
•For more information, please refer to the operating
instructions of your terminal device.
•The headset and the terminal device should be no
further than 1 metre apart. The shorter the distance,
the better.
•Make sure that the headset is fully charged and
switched off.
•Press and hold the multifunction button (1) for about 6
seconds to turn the headset on. It automatically enters
pairing mode. The white and blue indicator lights ash
alternately. The headset is searching for a Bluetooth
connection.
•Open the Bluetooth settings on your terminal device
and wait until “6005BT” appears in the list of Blue-
tooth devices found.
•Select “6005BT” and wait until the headset is listed as
connected in the Bluetooth settings on your terminal
device.
Note Bluetooth password
Some terminal devices require a password in order to
connect to another Bluetooth device.
•If your terminal device requests a password for
connection to the headset, enter 0000.
Note
•If pairing was successful, the display ashes quickly
in blue ten times and then ashes once every 6
seconds.
•If pairing was not successful, the display remains
permanently illuminated, and you will have to
perform pairing again.
•The display will go out if pairing takes longer than
60 seconds.
•If this happens, you will need to switch the headset
off and on again if you want to pair it with your
terminal device again.
•You can now use the headset.
5.2. Automatic Bluetooth connection (after
successful pairing)
•Make sure that the headset is switched on.
•Press the multifunction button (1) to automatically
connect the headset with your terminal device.
•You can now use the headset.
Note Connection impaired
If the Bluetooth connection is not established
automatically, check the following:
•Check the Bluetooth settings of your terminal
device to see whether “6005BT” is connected. If
not, repeat the steps listed under 5.1. Bluetooth
pairing.
•Check whether obstacles are impairing the range. If
so, move the devices closer together.
•The performance can also be affected by a weak
battery.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson WHP-6005BT - 131975 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson WHP-6005BT - 131975 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info