516095

Thomson VMD10 Manual

93
Zoom out
Zoom in
Previous page
1/104
Next page
EN91
Indications Function
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator blinks.
When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded. (੬ pg. 10)
Appears when the erase protection tab is set to “SAVE” while the Power Switch is
set to “ ” or “ ”.(੬ pg. 10)
Appears if dirt is detected on the heads during recording. Use an optional cleaning
cassette. (੬ pg. 95)
Appears if condensation occurs. When this indication is displayed, wait more than
1 hour until condensation disappears.
Appears if a tape is not loaded when the Recording Start/Stop Button is pressed
while the Power Switch is set to “ ” or “ ” and the Shooting Mode Dial is set
to “VIDEO”, “PS” or “DUAL”.
Appears when the tape ends during recording or playback. (੬ pg. 17)
● Appears when the date/time is not set. (੬ pg. 9)
● Appears when the clock (lithium) battery is discharged and the
previously set date/time is erased. (੬ pg. 9)
● Appears when Audio Dubbing is unavailable. (੬ pg. 78)
● Appears if dubbing of copyguarded signals is attempted while this camcorder is
being used as a recorder.
Appears when the MultiMediaCard’s memory is full and shooting is not possible.
Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed while the
Power Switch is set to “ ” or “ ” and the Shooting Mode Dial is set to “VGA”,
“XGA” or “DUAL”.
Appears when there is a problem with a MultiMediaCard and its memory is
corrupt, or it has not been initialised. Initialise the MultiMediaCard. (੬ pg. 53)
Appears when the Power Switch set to “ ” when there are no images
stored in the MultiMediaCard.
The error indications (E01 — E06) show what type of malfunction has occured.
When an error indication appears, the camcorder turns off automatically. Remove
the power supply (battery, etc.) and wait a few minutes for the indication to clear.
When it does, you can resume using the camcorder. If the indication remains,
consult your nearest THOMSON dealer.
Warning Indications
TAPE!
TAPE END
SET DATE/TIME!
ERROR!
REFER MANUAL
NO STORED
IMAGE
PLEASE
FORMAT
MEMORY CARD!
MEMORY IS FULL
CHECK TAPE’S
ERASE PROTEC-
TION SWITCH
E01 — E06
UNIT IN SAFE-
GUARD MODE
REMOVE AND
REATTACH
BATTERY
HEAD CLEANING
REQUIRED USE
CLEANING
CASSETTE
CONDENSATION
OPERATION
PAUSED
PLEASE WAIT
Downloaded from www.Manualslib.com manuals search engine
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson VMD10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson VMD10 in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info