628197
15
Zoom out
Zoom in
Previous page
1/40
Next page
Recording
15
EN
VCR
Programming a recording
Programming a recording can be done up to one month in advance with up to seven recordings being
pre-programmed. Ensure the television channels have been tuned and stored correctly and that the
clock is set to the correct time.
Programming a recording using the S
HOWVIEW
®
numbers
Each television broadcast has its own SHOWVIEW number guide which can be found in your TV
magazine.To programme the recording of a broadcast, all that is required is for you to enter this
number in the S
HOWVIEW menu; it contains the date, start and end time and the number of the
channel broadcasting the programme.
SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is
manufactured under licence from Gemstar Development Corporation.
1. Press the VCR button and then the TIMER button to access the SHOWVIEW menu.
2. Select the the frequency of the recording using the
and buttons: ONCE (recording of a single
programme), DAILY (daily recording from Monday to
Friday) or WEEKLY (recording of a weekly
programme).
3. Use the number buttons to enter the SHOWVIEW
number of the broadcast you want to record.
Note: If you make a mistake, press then enter the correct
number.
4. Press OK.
The data corresponding to the entered S
HOWVIEW
number are displayed.
• If PLEASE CHECK appears, check the number and re-
enter it.
• If - - appears, enter the programme number of the
channel. It will automatically be stored in the internal
S
HOWVIEW channel map.
5. To change one of the settings, select it using the
and buttons.Then press and to enter the
correct information.
6. Press the button to select the VPS/PDC function and activate or deactivate it using and
.
Note: Some channels telecast their programmes with VPS (Video Programme System) or PDC (Programme
Delivery Control) signals.These signals detected by the video recorder allow accurate triggering and stopping
of a recording, whatever the delay of the programmes.
7. Press to select the recording speed. Use the and buttons to scroll options: Standard
Play (SP), Intelligent Play (IP) and Long Play (LP).
Notes:
The IP feature adjusts the recording speed to quantity of video tape left. It switches speed from SP to LP if
there is not enough tape left to record the whole programme in SP mode.
The IP feature is not available when VPS/PDC is on.
ONCE
OK
i
0~9,
SHOWVIEW NO.
- - - - - - - - -
REC
PR DATE TIME
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - -
SP
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
- - - - - - - -~::
10
CH4 12
SP
11 11 55~::
i
DTH6300E_EN 28/05/04 18:48 Page 15
Downloaded from www.Manualslib.com manuals search engine
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson TV-VCR-DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson TV-VCR-DVD in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info