628197
9
Zoom out
Zoom in
Previous page
1/40
Next page
Connections and Setup
9
EN
Tuning in a video channel on your TV
If your television is not fitted with a Scart socket, you were unable to connect it to the AV1 socket
of the DVD/VCR using a Scart cable as shown on page 6, step 3. In this case, you must make below
settings before you start the automatic channel set-up (page 10).
The output frequency of this appliance is set at UHF channel 36.
If channel 36 is already used by another TV channel, or if the picture is distorted, you can change
the transmitter channel of your VCR. Stages 7 ~ 13 will show you how to change the output
frequency of your DVD/VCR.
Make sure that you have correctly installed the appliance as described earlier in this book.
1. Turn on your TV.
2. Press to turn on the appliance and then press the VCR button on the remote control.
3. Insert a pre-recorded video tape into the VCR and press PLAY on the remote control.
4. Select a TV channel number on which you wish to watch videos.
Don’t worry if you don’t have a video tape to play at this stage! If you switch the appliance on
and continue stages 5 ~ 6, instead of seeing video playback tune your TV until you see a bright
blue screen.
5. Tune this channel until the video picture is sharp and the sound is clear.
6. Store this channel on your TV.
You will need to look at the TV instruction book if you do not know how to do this.
Note: Only carry out stages 7 ~ 13 if you cannot obtain clear video playback as described in stages 1 ~ 6.
7. Select a TV channel number on which you wish to watch videos. Make sure that the DVD/VCR
is in standby by pressing on the remote control (only the clock will be displayed).
8. Press PROGRAM - or PROGRAM + on the front of
the appliance for more than 4 seconds. RF36 will
appear on the front display.The picture opposite will
be displayed on the TV screen.
9. Press PROGRAM - or PROGRAM + to select another video channel.You may select any
channel number between 22 and 68.
10. Select a TV channel number on which you wish to watch videos.
11. Tune this channel so that a bright blue screen appears.
12. Store this channel on your TV.
13. Press on the front of your appliance when you have finished.
Make sure that you have correctly installed the appliance and successfully tuned in a dedicated
video channel on your TV. If you do not tune in a dedicated video channel on your TV you will be
unable to view and record video tapes!
i
RF CHANNEL 36
P
SET
R
DTH6300E_EN 28/05/04 18:48 Page 9
Downloaded from www.Manualslib.com manuals search engine
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson TV-VCR-DVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson TV-VCR-DVD in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info