480550
11
Zoom out
Zoom in
Previous page
1/19
Next page
P8
MAIN MENU
5.1.4 Delete all
Use this menu to delete all channels. Select Delete All with the pq and press OK, then enter
the Password (default: 0000). In the confirmation window select Yes with
tu and press OK
to delete or select No to cancel.
5.1.5 Group Rename
In this menu you can change favourite group name. Use the pq buttons to select Group
Rename and press OK to enter.
1. With the
pq buttons select a group and press OK.
2. At the appearing Keyboard use the
pqtu buttons to highlight desired letters or
numbers and press OK to insert. After you entered desired group name, highlight OK at the
keyboard to confirm.
3. Press EXIT button to cancel the group rename.
5.2 Installation
5.2.1 Auto Scan
1. Use the pq buttons to select Installation, press OK button to enter menu.
2. With the
pq buttons select Auto Scan, press OK to enter the menu.
3. Press the
tu buttons to change Scan mode, and use the pq to highlight Search,
press OK to start auto scan.
5.2.2 Channel Scan
1. Use the pq buttons to select Installation, press OK to enter the menu.
2. With the
pq buttons to select Channel Scan and press OK to enter the menu.
3. Use the
tu buttons to select one of two Scan Modes By Channel and By Frequency.
4. When By Channel is selected use the cursor buttons to select Scan Band and Channel
No. When By Frequency is selected use the cursor buttons to select Frequency and
Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to start
scan. After Channels are found, they will be stored and receiver switches to the first one
saved in the list.
5.2.3 Antenna Setting
1. Press MENU to enter main menu.
2. Use the
pq buttons to select Installation, press OK to enter the menu.
3. With the
pq buttons select Antenna setting and press OK to enter.
4. Press the
tu buttons to change setting. If On is selected, the receiver will provide 5 V
antenna power (for active antennas).
5. Press EXIT button to exit.
5.2.4 Logical channel numbering
If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then
channels will be stored at operator defined order. You can activate/deactivate the LCN function
by setting the "LCN Mode" to ON/OFF.
5.3 Setup
This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting, OSD
Setting and Parental Lock.
1. Press
pq buttons to highlight desired menu and press OK button to enter the setting
menus. Then press
pq buttons to select desired item. Settings can be changed by
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson TTR 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson TTR 110 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info