480549
17
Zoom out
Zoom in
Previous page
1/19
Next page
P14
TROUBLESHOOTING
6.0 OPERATION
6.1 Changing Channels
There are 4 ways of channel selection - stepping through the channel list, selection by
number, from the on-screen channel list, and using the electronic programme guide (EPG).
1. Stepping through the channel list
To move through the channel list, press the
pq buttons on the remote control.
2. Selected by number
Enter the channel number directly by pressing numeric buttons, and press the OK button to
select desired channel.
3. Selected by on-screen channels list
You can also select the required channel directly from on-screen channel list. This is
displayed using the receiver’s main menu. See chapter 5.1.1 TV Channel list in this
manual for operation detail. Alternatively you can call up channel list by pressing OK in
viewing mode.
4. Selected by EPG
You can also select the required channel directly from electronic programme guide (EPG).
This is displayed by pressing EPG button on remote control. See in the below chapter of
this manual for operation detail.
6.2 Accessing the Electronic Program Guide (EPG)
1. Press EPG button to enter EPG menu.
2. Press numeric button [2] to switch between channel list, events schedule of the selected
channel and now/next events.
3. In the event schedule, press OK button to book the selected event, press numeric button
[3] to open the Detail menu for the selected event.
4. Press numeric button [1] to open the Booking list menu.
6.3 Accessing the favourite channels
1. Press OK to enter channel list.
2. Press
tu to select the desired favourite group.
3. Press
pq to select the favourite channel.
Alternatively you can press the FAV button to display the favourite list selection.
A.1 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Check the receiver
according to the procedures shown below. If the receiver does not work properly after checking
it, please contact your dealer or the local Service Hotline. Do NOT try to open or disassemble
the receiver. It may cause a dangerous situation and warrantee will be void.
Problem Possible cause What to do
Indicator on front panel
doesn’t light up
Power cable isn’t connected
to the wall outlet.
Check connection of the receiver to the
mains.
Remote control doesn’t
work
Batteries exhausted or not
correctly inserted.
Receiver locked up
Externally IR eye not correct
connected
Place new batteries.
Check polarization of the batteries.
Unplug the receiver and connect to the mains
again. Check if jack connector of IR extender
is inserted correctly on rear panel entrée.
No Audio via digital out,
audio on TV is present.
Digital audio amplifier not
setup correctly
Refer to the amplifiers manual.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson TTR 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson TTR 100 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info