669784
20
Zoom out
Zoom in
Previous page
1/84
Next page
- EN 7 -
2. PHONO/LINE Selection Switch
PHONO: Signals that have been amplied by the built-in equalizer amp are output from the analog
audio output jacks.
LINE: Use this when connecting to equipment that has PHONO inputs.
Caution
When set to ON, if connected to the PHONO inputs of an amplier, for example, the output from
speakers and headphones will be very loud, which could damage equipment or harm hearing.
3. PC encoding
4. DC input connector
After completing all other connections, connect the included AC adapter to this jack.
Conrm that the power plug of the AC adapter is plugged into a power outlet.
Unplug the power cord from the outlet when you are not planning to use the unit for an extended
period.
Do not use any AC adapter other than the one included.
Note
Be sure to connect the power cord to an AC outlet that supplies the correct voltage. Connection to
an outlet that supplies the incorrect voltage could cause re or electric shock.
Hold the power plug when plugging it into an outlet or unplugging it. Never pull or yank on the power
cord.
Unplug the power cord from the outlet when you are not planning to use the unit for an extended
period of time.
5. Power ON/OFF button
Switch the ON button to turn the unit on or turn off.
6. BT transmitter ON/OFF button
Switch the ON button to activate Bluetooth or turn it off.
Handling records
Holding records
When holding a record or removing it from its sleeve, avoid
touching the grooves by holding the record by its label and
edge with one hand or by holding it by its edge with both hands.
Cleaning
Fingerprints and dust on a record can cause noise and the sound to skip, as well as damage the
record itself and the stylus. Use a commercially available record cleaner to clean records. Do not
use thinner or anything other than a record cleaner. Such chemicals could harm the surface of the
record.
When using a record cleaner, wipe the surface of the record in a circular motion, following the
grooves.
Precautions
Do not leave records in places that are exposed to direct sunlight or are very hot or very humid.
Leaving a record in such a condition for a long time could result in warping or other damage.
Do not stack multiple records or place heavy objects on top of them. Do not leave records at an
angle for long amounts of time either. Doing so could result in warping or other damage.
Do not allow hard objects to directly touch the audio grooves. Doing so could cause scratches.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson TT600BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson TT600BT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info